lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/6] ARM: dts: qcom: msm8974-hammerhead: add support for backlight
Date
Add necessary device tree nodes for the main LCD backlight.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
This requires this series that should be merged soon:
https://lore.kernel.org/lkml/20190424092505.6578-1-masneyb@onstation.org/
The device tree bindings have been reviewed. The driver changes have
received 3 {Reviewed,Acked}-bys.

Changes since v1:
- None

.../qcom-msm8974-lge-nexus5-hammerhead.dts | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index b3b04736a159..b7cf4b1019e9 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -289,6 +289,16 @@
};
};

+ i2c11_pins: i2c11 {
+ mux {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c11";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
i2c12_pins: i2c12 {
mux {
pins = "gpio87", "gpio88";
@@ -369,6 +379,30 @@
};
};

+ i2c@f9967000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c11_pins>;
+ clock-frequency = <355000>;
+ qcom,src-freq = <50000000>;
+
+ led-controller@38 {
+ compatible = "ti,lm3630a";
+ status = "ok";
+ reg = <0x38>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <0 1>;
+ label = "lcd-backlight";
+ default-brightness = <200>;
+ };
+ };
+ };
+
i2c@f9968000 {
status = "ok";
pinctrl-names = "default";
--
2.20.1
\
 
 \ /
  Last update: 2019-05-09 04:04    [W:0.135 / U:12.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site