lkml.org 
[lkml]   [2019]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 07/10] regulator: mt6358: Add support for MT6358 regulator
On Fri, May 3, 2019 at 6:34 PM Hsin-Hsiung Wang
<hsin-hsiung.wang@mediatek.com> wrote:
>
> The MT6358 is a regulator found on boards based on MediaTek MT8183 and
> probably other SoCs. It is a so called pmic and connects as a slave to
> SoC using SPI, wrapped inside the pmic-wrapper.
>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
> drivers/regulator/Kconfig | 9 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/mt6358-regulator.c | 586 +++++++++++++++++++++
> include/linux/regulator/mt6358-regulator.h | 56 ++
> 4 files changed, 652 insertions(+)
> create mode 100644 drivers/regulator/mt6358-regulator.c
> create mode 100644 include/linux/regulator/mt6358-regulator.h
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index b7f249ee5e68..668e9716558c 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -615,6 +615,15 @@ config REGULATOR_MT6323
> This driver supports the control of different power rails of device
> through regulator interface.
>
> +config REGULATOR_MT6358
> + tristate "MediaTek MT6358 PMIC"
> + depends on MFD_MT6397
> + help
> + Say y here to select this option to enable the power regulator of
> + MediaTek MT6358 PMIC.
> + This driver supports the control of different power rails of device
> + through regulator interface.
> +
> config REGULATOR_MT6380
> tristate "MediaTek MT6380 PMIC"
> depends on MTK_PMIC_WRAP
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 1169f8a27d91..eeb60395c692 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -79,6 +79,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
> obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
> obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
> obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
> +obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
> obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
> obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
> obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
> diff --git a/drivers/regulator/mt6358-regulator.c b/drivers/regulator/mt6358-regulator.c
> new file mode 100644
> index 000000000000..fd528a3e55fd
> --- /dev/null
> +++ b/drivers/regulator/mt6358-regulator.c
> @@ -0,0 +1,586 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2019 MediaTek Inc.
> +
> +#include <linux/mfd/mt6358/registers.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/mt6358-regulator.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +#define MT6358_BUCK_MODE_AUTO 0
> +#define MT6358_BUCK_MODE_FORCE_PWM 1
> +
> +/*
> + * MT6358 regulators' information
> + *
> + * @desc: standard fields of regulator description.
> + * @qi: Mask for query enable signal status of regulators
> + */
> +struct mt6358_regulator_info {
> + struct regulator_desc desc;
> + u32 status_reg;
> + u32 qi;
> + const u32 *index_table;
> + unsigned int n_table;
> + u32 vsel_shift;
> + u32 da_vsel_reg;
> + u32 da_vsel_mask;
> + u32 da_vsel_shift;
> + u32 modeset_reg;
> + u32 modeset_mask;
> + u32 modeset_shift;
> +};
> +
> +#define MT6358_BUCK(match, vreg, min, max, step, \
> + volt_ranges, vosel_mask, _da_vsel_reg, _da_vsel_mask, \
> + _da_vsel_shift, _modeset_reg, _modeset_shift) \
> +[MT6358_ID_##vreg] = { \
> + .desc = { \
> + .name = #vreg, \
> + .of_match = of_match_ptr(match), \
> + .ops = &mt6358_volt_range_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = MT6358_ID_##vreg, \
> + .owner = THIS_MODULE, \
> + .n_voltages = ((max) - (min)) / (step) + 1, \
> + .linear_ranges = volt_ranges, \
> + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
> + .vsel_reg = MT6358_BUCK_##vreg##_ELR0, \
> + .vsel_mask = vosel_mask, \
> + .enable_reg = MT6358_BUCK_##vreg##_CON0, \
> + .enable_mask = BIT(0), \
> + .of_map_mode = mt6358_map_mode, \
> + }, \
> + .status_reg = MT6358_BUCK_##vreg##_DBG1, \
> + .qi = BIT(0), \
> + .da_vsel_reg = _da_vsel_reg, \
> + .da_vsel_mask = _da_vsel_mask, \
> + .da_vsel_shift = _da_vsel_shift, \
> + .modeset_reg = _modeset_reg, \
> + .modeset_mask = BIT(_modeset_shift), \
> + .modeset_shift = _modeset_shift \
> +}
> +
> +#define MT6358_LDO(match, vreg, ldo_volt_table, \
> + ldo_index_table, enreg, enbit, vosel, \
> + vosel_mask, vosel_shift) \
> +[MT6358_ID_##vreg] = { \
> + .desc = { \
> + .name = #vreg, \
> + .of_match = of_match_ptr(match), \
> + .ops = &mt6358_volt_table_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = MT6358_ID_##vreg, \
> + .owner = THIS_MODULE, \
> + .n_voltages = ARRAY_SIZE(ldo_volt_table), \
> + .volt_table = ldo_volt_table, \
> + .vsel_reg = vosel, \
> + .vsel_mask = vosel_mask, \
> + .enable_reg = enreg, \
> + .enable_mask = BIT(enbit), \
> + }, \
> + .status_reg = MT6358_LDO_##vreg##_CON1, \
> + .qi = BIT(15), \
> + .index_table = ldo_index_table, \
> + .n_table = ARRAY_SIZE(ldo_index_table), \
> + .vsel_shift = vosel_shift, \
> +}
> +
> +#define MT6358_LDO1(match, vreg, min, max, step, \
> + volt_ranges, _da_vsel_reg, _da_vsel_mask, \
> + _da_vsel_shift, vosel, vosel_mask) \
> +[MT6358_ID_##vreg] = { \
> + .desc = { \
> + .name = #vreg, \
> + .of_match = of_match_ptr(match), \
> + .ops = &mt6358_volt_range_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = MT6358_ID_##vreg, \
> + .owner = THIS_MODULE, \
> + .n_voltages = ((max) - (min)) / (step) + 1, \
> + .linear_ranges = volt_ranges, \
> + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \
> + .vsel_reg = vosel, \
> + .vsel_mask = vosel_mask, \
> + .enable_reg = MT6358_LDO_##vreg##_CON0, \
> + .enable_mask = BIT(0), \
> + }, \
> + .da_vsel_reg = _da_vsel_reg, \
> + .da_vsel_mask = _da_vsel_mask, \
> + .da_vsel_shift = _da_vsel_shift, \
> + .status_reg = MT6358_LDO_##vreg##_DBG1, \
> + .qi = BIT(0), \
> +}
> +
> +#define MT6358_REG_FIXED(match, vreg, \
> + enreg, enbit, volt) \
> +[MT6358_ID_##vreg] = { \
> + .desc = { \
> + .name = #vreg, \
> + .of_match = of_match_ptr(match), \
> + .ops = &mt6358_volt_fixed_ops, \
> + .type = REGULATOR_VOLTAGE, \
> + .id = MT6358_ID_##vreg, \
> + .owner = THIS_MODULE, \
> + .n_voltages = 1, \
> + .enable_reg = enreg, \
> + .enable_mask = BIT(enbit), \
> + .min_uV = volt, \
> + }, \
> + .status_reg = MT6358_LDO_##vreg##_CON1, \
> + .qi = BIT(15), \
> +}
> +
> +static const struct regulator_linear_range buck_volt_range1[] = {
> + REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 6250),
> +};
> +
> +static const struct regulator_linear_range buck_volt_range2[] = {
> + REGULATOR_LINEAR_RANGE(500000, 0, 0x7f, 12500),
> +};
> +
> +static const struct regulator_linear_range buck_volt_range3[] = {
> + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
> +};
> +
> +static const struct regulator_linear_range buck_volt_range4[] = {
> + REGULATOR_LINEAR_RANGE(1000000, 0, 0x7f, 12500),
> +};
> +
> +static const u32 vdram2_voltages[] = {
> + 600000, 1800000,
> +};
> +
> +static const u32 vsim1_voltages[] = {
> + 1700000, 1800000, 2700000, 3000000, 3100000,
> +};
> +
> +static const u32 vibr_voltages[] = {
> + 1200000, 1300000, 1500000, 1800000,
> + 2000000, 2800000, 3000000, 3300000,
> +};
> +
> +static const u32 vusb_voltages[] = {
> + 3000000, 3100000,
> +};
> +
> +static const u32 vcamd_voltages[] = {
> + 900000, 1000000, 1100000, 1200000,
> + 1300000, 1500000, 1800000,
> +};
> +
> +static const u32 vefuse_voltages[] = {
> + 1700000, 1800000, 1900000,
> +};
> +
> +static const u32 vmch_voltages[] = {
> + 2900000, 3000000, 3300000,
> +};
> +
> +static const u32 vcama1_voltages[] = {
> + 1800000, 2500000, 2700000,
> + 2800000, 2900000, 3000000,
> +};
> +
> +static const u32 vemc_voltages[] = {
> + 2900000, 3000000, 3300000,
> +};
> +
> +static const u32 vcn33_bt_wifi_voltages[] = {
> + 3300000, 3400000, 3500000,
> +};
> +
> +static const u32 vcama2_voltages[] = {
> + 1800000, 2500000, 2700000,
> + 2800000, 2900000, 3000000,
> +};
> +
> +static const u32 vmc_voltages[] = {
> + 1800000, 2900000, 3000000, 3300000,
> +};
> +
> +static const u32 vldo28_voltages[] = {
> + 2800000, 3000000,
> +};
> +
> +static const u32 vsim2_voltages[] = {
> + 1700000, 1800000, 2700000,
> + 3000000, 3100000,
> +};
> +
> +static const u32 vdram2_idx[] = {
> + 0, 12,
> +};
> +
> +static const u32 vsim1_idx[] = {
> + 3, 4, 8, 11, 12,
> +};
> +
> +static const u32 vibr_idx[] = {
> + 0, 1, 2, 4, 5, 9, 11, 13,
> +};
> +
> +static const u32 vusb_idx[] = {
> + 3, 4,
> +};
> +
> +static const u32 vcamd_idx[] = {
> + 3, 4, 5, 6, 7, 9, 12,
> +};
> +
> +static const u32 vefuse_idx[] = {
> + 11, 12, 13,
> +};
> +
> +static const u32 vmch_idx[] = {
> + 2, 3, 5,
> +};
> +
> +static const u32 vcama1_idx[] = {
> + 0, 7, 9, 10, 11, 12,
> +};
> +
> +static const u32 vemc_idx[] = {
> + 2, 3, 5,
> +};
> +
> +static const u32 vcn33_bt_wifi_idx[] = {
> + 1, 2, 3,
> +};
> +
> +static const u32 vcama2_idx[] = {
> + 0, 7, 9, 10, 11, 12,
> +};
> +
> +static const u32 vmc_idx[] = {
> + 4, 10, 11, 13,
> +};
> +
> +static const u32 vldo28_idx[] = {
> + 1, 3,
> +};
> +
> +static const u32 vsim2_idx[] = {
> + 3, 4, 8, 11, 12,
> +};
> +
> +static inline unsigned int mt6358_map_mode(unsigned int mode)
> +{
> + return mode == MT6358_BUCK_MODE_AUTO ?
> + REGULATOR_MODE_NORMAL : REGULATOR_MODE_FAST;
> +}
> +
> +static int mt6358_set_voltage_sel(struct regulator_dev *rdev,
> + unsigned int selector)
> +{
> + int idx, ret;
> + const u32 *pvol;
> + struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
> +
> + pvol = (const u32 *)info->index_table;

Why do you need that cast? I think info->index_table is already the right type.


> +
> + idx = pvol[selector];
> + ret = regmap_update_bits(rdev->regmap, info->desc.vsel_reg,
> + info->desc.vsel_mask,
> + idx << info->vsel_shift);
> +
> + return ret;
> +}
> +
> +static int mt6358_get_voltage_sel(struct regulator_dev *rdev)
> +{
> + int idx, ret;
> + u32 selector;
> + struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
> + const u32 *pvol;
> +
> + ret = regmap_read(rdev->regmap, info->desc.vsel_reg, &selector);
> + if (ret != 0) {
> + dev_info(&rdev->dev,
> + "Failed to get mt6358 %s vsel reg: %d\n",
> + info->desc.name, ret);
> + return ret;
> + }
> +
> + selector = (selector & info->desc.vsel_mask) >> info->vsel_shift;
> + pvol = (const u32 *)info->index_table;
> + ret = -1;
> + for (idx = 0; idx < info->desc.n_voltages; idx++) {
> + if (pvol[idx] == selector) {
> + ret = idx;
> + break;

On top of Mark's comment, I'd just return idx; here.

> + }
> + }
> +
> + return ret;

And return -1 here (or whatever better error code we should return).

> +}
> +
> +static int mt6358_get_buck_voltage_sel(struct regulator_dev *rdev)
> +{
> + int ret, regval;
> + struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
> +
> + ret = regmap_read(rdev->regmap, info->da_vsel_reg, &regval);
> + if (ret != 0) {
> + dev_info(&rdev->dev,
> + "Failed to get mt6358 Buck %s vsel reg: %d\n",
> + info->desc.name, ret);
> + return ret;
> + }
> +
> + ret = (regval >> info->da_vsel_shift) & info->da_vsel_mask;
> +
> + return ret;
> +}
> +
> +static int mt6358_get_status(struct regulator_dev *rdev)
> +{
> + int ret;
> + u32 regval;
> + struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
> +
> + ret = regmap_read(rdev->regmap, info->status_reg, &regval);
> + if (ret != 0) {
> + dev_info(&rdev->dev, "Failed to get enable reg: %d\n", ret);
> + return ret;
> + }
> +
> + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
> +}
> +
> +static int mt6358_regulator_set_mode(struct regulator_dev *rdev,
> + unsigned int mode)
> +{
> + struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
> + int ret, val;
> +
> + switch (mode) {
> + case REGULATOR_MODE_FAST:
> + val = MT6358_BUCK_MODE_FORCE_PWM;
> + break;
> + case REGULATOR_MODE_NORMAL:
> + val = MT6358_BUCK_MODE_AUTO;
> + break;
> + default:
> + ret = -EINVAL;
> + goto err_mode;
> + }
> +
> + dev_dbg(&rdev->dev, "mt6358 buck set_mode %#x, %#x, %#x, %#x\n",
> + info->modeset_reg, info->modeset_mask,
> + info->modeset_shift, val);
> +
> + val <<= info->modeset_shift;
> + ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
> + info->modeset_mask, val);
> +err_mode:
> + if (ret != 0) {
> + dev_err(&rdev->dev,
> + "Failed to set mt6358 buck mode: %d\n", ret);
> + return ret;

Drop this line, and just do return ret below.

> + }
> +
> + return 0;
> +}
> +
> +static unsigned int mt6358_regulator_get_mode(struct regulator_dev *rdev)
> +{
> + struct mt6358_regulator_info *info = rdev_get_drvdata(rdev);
> + int ret, regval;
> +
> + ret = regmap_read(rdev->regmap, info->modeset_reg, &regval);
> + if (ret != 0) {
> + dev_err(&rdev->dev,
> + "Failed to get mt6358 buck mode: %d\n", ret);
> + return ret;
> + }
> +
> + switch ((regval & info->modeset_mask) >> info->modeset_shift) {
> + case MT6358_BUCK_MODE_AUTO:
> + return REGULATOR_MODE_NORMAL;
> + case MT6358_BUCK_MODE_FORCE_PWM:
> + return REGULATOR_MODE_FAST;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct regulator_ops mt6358_volt_range_ops = {
> + .list_voltage = regulator_list_voltage_linear_range,
> + .map_voltage = regulator_map_voltage_linear_range,
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .get_voltage_sel = mt6358_get_buck_voltage_sel,
> + .set_voltage_time_sel = regulator_set_voltage_time_sel,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .get_status = mt6358_get_status,
> + .set_mode = mt6358_regulator_set_mode,
> + .get_mode = mt6358_regulator_get_mode,
> +};
> +
> +static const struct regulator_ops mt6358_volt_table_ops = {
> + .list_voltage = regulator_list_voltage_table,
> + .map_voltage = regulator_map_voltage_iterate,
> + .set_voltage_sel = mt6358_set_voltage_sel,
> + .get_voltage_sel = mt6358_get_voltage_sel,
> + .set_voltage_time_sel = regulator_set_voltage_time_sel,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .get_status = mt6358_get_status,
> +};
> +
> +static const struct regulator_ops mt6358_volt_fixed_ops = {
> + .list_voltage = regulator_list_voltage_linear,
> + .enable = regulator_enable_regmap,
> + .disable = regulator_disable_regmap,
> + .is_enabled = regulator_is_enabled_regmap,
> + .get_status = mt6358_get_status,
> +};
> +
> +/* The array is indexed by id(MT6358_ID_XXX) */
> +static struct mt6358_regulator_info mt6358_regulators[] = {
> + MT6358_BUCK("buck_vdram1", VDRAM1, 500000, 2087500, 12500,
> + buck_volt_range2, 0x7f, MT6358_BUCK_VDRAM1_DBG0, 0x7f,
> + 0, MT6358_VDRAM1_ANA_CON0, 8),
> + MT6358_BUCK("buck_vcore", VCORE, 500000, 1293750, 6250,
> + buck_volt_range1, 0x7f, MT6358_BUCK_VCORE_DBG0, 0x7f,
> + 0, MT6358_VCORE_VGPU_ANA_CON0, 1),
> + MT6358_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
> + buck_volt_range3, 0x3f, MT6358_BUCK_VPA_DBG0, 0x3f, 0,
> + MT6358_VPA_ANA_CON0, 3),
> + MT6358_BUCK("buck_vproc11", VPROC11, 500000, 1293750, 6250,
> + buck_volt_range1, 0x7f, MT6358_BUCK_VPROC11_DBG0, 0x7f,
> + 0, MT6358_VPROC_ANA_CON0, 1),
> + MT6358_BUCK("buck_vproc12", VPROC12, 500000, 1293750, 6250,
> + buck_volt_range1, 0x7f, MT6358_BUCK_VPROC12_DBG0, 0x7f,
> + 0, MT6358_VPROC_ANA_CON0, 2),
> + MT6358_BUCK("buck_vgpu", VGPU, 500000, 1293750, 6250,
> + buck_volt_range1, 0x7f, MT6358_BUCK_VGPU_DBG0, 0x7f, 0,
> + MT6358_VCORE_VGPU_ANA_CON0, 2),
> + MT6358_BUCK("buck_vs2", VS2, 500000, 2087500, 12500,
> + buck_volt_range2, 0x7f, MT6358_BUCK_VS2_DBG0, 0x7f, 0,
> + MT6358_VS2_ANA_CON0, 8),
> + MT6358_BUCK("buck_vmodem", VMODEM, 500000, 1293750, 6250,
> + buck_volt_range1, 0x7f, MT6358_BUCK_VMODEM_DBG0, 0x7f,
> + 0, MT6358_VMODEM_ANA_CON0, 8),
> + MT6358_BUCK("buck_vs1", VS1, 1000000, 2587500, 12500,
> + buck_volt_range4, 0x7f, MT6358_BUCK_VS1_DBG0, 0x7f, 0,
> + MT6358_VS1_ANA_CON0, 8),
> + MT6358_REG_FIXED("ldo_vrf12", VRF12,
> + MT6358_LDO_VRF12_CON0, 0, 1200000),
> + MT6358_REG_FIXED("ldo_vio18", VIO18,
> + MT6358_LDO_VIO18_CON0, 0, 1800000),
> + MT6358_REG_FIXED("ldo_vcamio", VCAMIO,
> + MT6358_LDO_VCAMIO_CON0, 0, 1800000),
> + MT6358_REG_FIXED("ldo_vcn18", VCN18, MT6358_LDO_VCN18_CON0, 0, 1800000),
> + MT6358_REG_FIXED("ldo_vfe28", VFE28, MT6358_LDO_VFE28_CON0, 0, 2800000),
> + MT6358_REG_FIXED("ldo_vcn28", VCN28, MT6358_LDO_VCN28_CON0, 0, 2800000),
> + MT6358_REG_FIXED("ldo_vxo22", VXO22, MT6358_LDO_VXO22_CON0, 0, 2200000),
> + MT6358_REG_FIXED("ldo_vaux18", VAUX18,
> + MT6358_LDO_VAUX18_CON0, 0, 1800000),
> + MT6358_REG_FIXED("ldo_vbif28", VBIF28,
> + MT6358_LDO_VBIF28_CON0, 0, 2800000),
> + MT6358_REG_FIXED("ldo_vio28", VIO28, MT6358_LDO_VIO28_CON0, 0, 2800000),
> + MT6358_REG_FIXED("ldo_va12", VA12, MT6358_LDO_VA12_CON0, 0, 1200000),
> + MT6358_REG_FIXED("ldo_vrf18", VRF18, MT6358_LDO_VRF18_CON0, 0, 1800000),
> + MT6358_REG_FIXED("ldo_vaud28", VAUD28,
> + MT6358_LDO_VAUD28_CON0, 0, 2800000),
> + MT6358_LDO("ldo_vdram2", VDRAM2, vdram2_voltages, vdram2_idx,
> + MT6358_LDO_VDRAM2_CON0, 0, MT6358_LDO_VDRAM2_ELR0, 0x10, 0),
> + MT6358_LDO("ldo_vsim1", VSIM1, vsim1_voltages, vsim1_idx,
> + MT6358_LDO_VSIM1_CON0, 0, MT6358_VSIM1_ANA_CON0, 0xf00, 8),
> + MT6358_LDO("ldo_vibr", VIBR, vibr_voltages, vibr_idx,
> + MT6358_LDO_VIBR_CON0, 0, MT6358_VIBR_ANA_CON0, 0xf00, 8),
> + MT6358_LDO("ldo_vusb", VUSB, vusb_voltages, vusb_idx,
> + MT6358_LDO_VUSB_CON0_0, 0, MT6358_VUSB_ANA_CON0, 0x700, 8),
> + MT6358_LDO("ldo_vcamd", VCAMD, vcamd_voltages, vcamd_idx,
> + MT6358_LDO_VCAMD_CON0, 0, MT6358_VCAMD_ANA_CON0, 0xf00, 8),
> + MT6358_LDO("ldo_vefuse", VEFUSE, vefuse_voltages, vefuse_idx,
> + MT6358_LDO_VEFUSE_CON0, 0, MT6358_VEFUSE_ANA_CON0, 0xf00, 8),
> + MT6358_LDO("ldo_vmch", VMCH, vmch_voltages, vmch_idx,
> + MT6358_LDO_VMCH_CON0, 0, MT6358_VMCH_ANA_CON0, 0x700, 8),
> + MT6358_LDO("ldo_vcama1", VCAMA1, vcama1_voltages, vcama1_idx,
> + MT6358_LDO_VCAMA1_CON0, 0, MT6358_VCAMA1_ANA_CON0, 0xf00, 8),
> + MT6358_LDO("ldo_vemc", VEMC, vemc_voltages, vemc_idx,
> + MT6358_LDO_VEMC_CON0, 0, MT6358_VEMC_ANA_CON0, 0x700, 8),
> + MT6358_LDO("ldo_vcn33_bt", VCN33_BT, vcn33_bt_wifi_voltages,
> + vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_0,
> + 0, MT6358_VCN33_ANA_CON0, 0x300, 8),
> + MT6358_LDO("ldo_vcn33_wifi", VCN33_WIFI, vcn33_bt_wifi_voltages,
> + vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_1,
> + 0, MT6358_VCN33_ANA_CON0, 0x300, 8),
> + MT6358_LDO("ldo_vcama2", VCAMA2, vcama2_voltages, vcama2_idx,
> + MT6358_LDO_VCAMA2_CON0, 0, MT6358_VCAMA2_ANA_CON0, 0xf00, 8),
> + MT6358_LDO("ldo_vmc", VMC, vmc_voltages, vmc_idx,
> + MT6358_LDO_VMC_CON0, 0, MT6358_VMC_ANA_CON0, 0xf00, 8),
> + MT6358_LDO("ldo_vldo28", VLDO28, vldo28_voltages, vldo28_idx,
> + MT6358_LDO_VLDO28_CON0_0, 0,
> + MT6358_VLDO28_ANA_CON0, 0x300, 8),
> + MT6358_LDO("ldo_vsim2", VSIM2, vsim2_voltages, vsim2_idx,
> + MT6358_LDO_VSIM2_CON0, 0, MT6358_VSIM2_ANA_CON0, 0xf00, 8),
> + MT6358_LDO1("ldo_vsram_proc11", VSRAM_PROC11, 500000, 1293750, 6250,
> + buck_volt_range1, MT6358_LDO_VSRAM_PROC11_DBG0, 0x7f, 8,
> + MT6358_LDO_VSRAM_CON0, 0x7f),
> + MT6358_LDO1("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750, 6250,
> + buck_volt_range1, MT6358_LDO_VSRAM_OTHERS_DBG0, 0x7f, 8,
> + MT6358_LDO_VSRAM_CON2, 0x7f),
> + MT6358_LDO1("ldo_vsram_gpu", VSRAM_GPU, 500000, 1293750, 6250,
> + buck_volt_range1, MT6358_LDO_VSRAM_GPU_DBG0, 0x7f, 8,
> + MT6358_LDO_VSRAM_CON3, 0x7f),
> + MT6358_LDO1("ldo_vsram_proc12", VSRAM_PROC12, 500000, 1293750, 6250,
> + buck_volt_range1, MT6358_LDO_VSRAM_PROC12_DBG0, 0x7f, 8,
> + MT6358_LDO_VSRAM_CON1, 0x7f),
> +};
> +
> +static int mt6358_regulator_probe(struct platform_device *pdev)
> +{
> + struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent);
> + struct regulator_config config = {};
> + struct regulator_dev *rdev;
> + int i;
> +
> + for (i = 0; i < MT6358_MAX_REGULATOR; i++) {
> + config.dev = &pdev->dev;
> + config.driver_data = &mt6358_regulators[i];
> + config.regmap = mt6397->regmap;
> +
> + rdev = devm_regulator_register(&pdev->dev,
> + &mt6358_regulators[i].desc,
> + &config);
> + if (IS_ERR(rdev)) {
> + dev_err(&pdev->dev, "failed to register %s\n",
> + mt6358_regulators[i].desc.name);
> + return PTR_ERR(rdev);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static const struct platform_device_id mt6358_platform_ids[] = {
> + {"mt6358-regulator", 0},
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(platform, mt6358_platform_ids);
> +
> +static struct platform_driver mt6358_regulator_driver = {
> + .driver = {
> + .name = "mt6358-regulator",
> + },
> + .probe = mt6358_regulator_probe,
> + .id_table = mt6358_platform_ids,
> +};
> +
> +module_platform_driver(mt6358_regulator_driver);
> +
> +MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
> +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6358 PMIC");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/regulator/mt6358-regulator.h b/include/linux/regulator/mt6358-regulator.h
> new file mode 100644
> index 000000000000..1cc304946d09
> --- /dev/null
> +++ b/include/linux/regulator/mt6358-regulator.h
> @@ -0,0 +1,56 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + */
> +
> +#ifndef __LINUX_REGULATOR_MT6358_H
> +#define __LINUX_REGULATOR_MT6358_H
> +
> +enum {
> + MT6358_ID_VDRAM1 = 0,
> + MT6358_ID_VCORE,
> + MT6358_ID_VPA,
> + MT6358_ID_VPROC11,
> + MT6358_ID_VPROC12,
> + MT6358_ID_VGPU,
> + MT6358_ID_VS2,
> + MT6358_ID_VMODEM,
> + MT6358_ID_VS1,
> + MT6358_ID_VDRAM2 = 9,
> + MT6358_ID_VSIM1,
> + MT6358_ID_VIBR,
> + MT6358_ID_VRF12,
> + MT6358_ID_VIO18,
> + MT6358_ID_VUSB,
> + MT6358_ID_VCAMIO,
> + MT6358_ID_VCAMD,
> + MT6358_ID_VCN18,
> + MT6358_ID_VFE28,
> + MT6358_ID_VSRAM_PROC11,
> + MT6358_ID_VCN28,
> + MT6358_ID_VSRAM_OTHERS,
> + MT6358_ID_VSRAM_GPU,
> + MT6358_ID_VXO22,
> + MT6358_ID_VEFUSE,
> + MT6358_ID_VAUX18,
> + MT6358_ID_VMCH,
> + MT6358_ID_VBIF28,
> + MT6358_ID_VSRAM_PROC12,
> + MT6358_ID_VCAMA1,
> + MT6358_ID_VEMC,
> + MT6358_ID_VIO28,
> + MT6358_ID_VA12,
> + MT6358_ID_VRF18,
> + MT6358_ID_VCN33_BT,
> + MT6358_ID_VCN33_WIFI,
> + MT6358_ID_VCAMA2,
> + MT6358_ID_VMC,
> + MT6358_ID_VLDO28,
> + MT6358_ID_VAUD28,
> + MT6358_ID_VSIM2,
> + MT6358_ID_RG_MAX,
> +};
> +
> +#define MT6358_MAX_REGULATOR MT6358_ID_RG_MAX
> +
> +#endif /* __LINUX_REGULATOR_MT6358_H */
> --
> 2.18.0
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

\
 
 \ /
  Last update: 2019-05-07 07:49    [W:0.095 / U:11.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site