[lkml]   [2019]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 4.19 170/276] clk: rockchip: Fix video codec clocks on rk3288
[ Upstream commit 00c0cd9e59d265b393553e9afa54fee8b10e8158 ]

It appears that there is a typo in the rk3288 TRM. For
GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's
the other way around.

How do I know? Here's my evidence:

1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec
using the new muxgrf type on rk3288") we always pretended that we
were using "aclk_vdpu" and the comment in the code said that this
matched the default setting in the system. In fact the default
setting is 0 according to the TRM and according to reading memory
at bootup. In addition rk3288-based Chromebooks ran like this and
the video codecs worked.
2. With the existing clock code if you boot up and try to enable the
new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused"
on the command line), you get errors like "failed to get ack on
domain 'pd_video', val=0x80208". After flipping vepu/vdpu things
init OK.
3. If I export and add both the vepu and vdpu to the list of clocks
for RK3288_PD_VIDEO I can get past the power domain errors, but now
I freeze when the vpu_mmu gets initted.
4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up
and probes OK showing that somehow the "vdpu" was important to keep
enabled. This is because we were actually using it as a parent.
5. After this change I can hack "aclk_vcodec_pre" to parent from
"aclk_vepu" using assigned-clocks and the video codec still probes
6. Rockchip has said so on the mailing list [1]. let's fix it.

Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested
by Jonas Karlman. Prior to the same commit you could do
clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu".
That's because "aclk_vcodec" was a simple gate clock (always gets
CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu". After
that commit "aclk_vcodec_pre" gets in the way so we need to add


Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")
Suggested-by: Jonas Karlman <>
Suggested-by: Randy Li <>
Signed-off-by: Douglas Anderson <>
Signed-off-by: Heiko Stuebner <>
Signed-off-by: Sasha Levin <>
drivers/clk/rockchip/clk-rk3288.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 45cd2897e586b..c6cd6d28af56f 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -198,7 +198,7 @@ PNAME(mux_hsadcout_p) = { "hsadc_src", "ext_hsadc" };
PNAME(mux_edp_24m_p) = { "ext_edp_24m", "xin24m" };
PNAME(mux_tspout_p) = { "cpll", "gpll", "npll", "xin27m" };

-PNAME(mux_aclk_vcodec_pre_p) = { "aclk_vepu", "aclk_vdpu" };
+PNAME(mux_aclk_vcodec_pre_p) = { "aclk_vdpu", "aclk_vepu" };
PNAME(mux_usbphy480m_p) = { "sclk_otgphy1_480m", "sclk_otgphy2_480m",
"sclk_otgphy0_480m" };
PNAME(mux_hsicphy480m_p) = { "cpll", "gpll", "usbphy480m_src" };
@@ -399,7 +399,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
- MUXGRF(0, "aclk_vcodec_pre", mux_aclk_vcodec_pre_p, 0,
+ MUXGRF(0, "aclk_vcodec_pre", mux_aclk_vcodec_pre_p, CLK_SET_RATE_PARENT,
RK3288_GRF_SOC_CON(0), 7, 1, MFLAGS),
GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vcodec_pre", 0,

 \ /
  Last update: 2019-05-30 06:08    [W:0.766 / U:9.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site