lkml.org 
[lkml]   [2019]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm64: dts: ls1028a: Add esdhc node in dts
On Wed, May 15, 2019 at 12:00:46PM +0800, Yinbo Zhu wrote:
> From: Ashish Kumar <Ashish.Kumar@nxp.com>
>
> This patch is to add esdhc node and enable SD UHS-I,
> eMMC HS200 for ls1028ardb/ls1028aqds board.
>
> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
> ---
> Change in v2:
> Update the patch title
> Add a commont in dts code
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 8 ++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 13 ++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 27 +++++++++++++++++++++
> 3 files changed, 48 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index 14c79f4..180e5d2 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -42,6 +42,14 @@
> status = "okay";
> };
>
> +&esdhc {
> + status = "okay";
> +};
> +
> +&esdhc1 {
> + status = "okay";
> +};
> +
> &i2c0 {
> status = "okay";
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index f86b054..1bfaf42 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -30,6 +30,19 @@
> };
> };
>
> +&esdhc {
> + status = "okay";

We usually put 'status' at the end of property list.

> + sd-uhs-sdr104;
> + sd-uhs-sdr50;
> + sd-uhs-sdr25;
> + sd-uhs-sdr12;
> + };

Bad indentation.

> +
> +&esdhc1 {
> + status = "okay";
> + mmc-hs200-1_8v;
> + };
> +
> &i2c0 {
> status = "okay";
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 2896bbc..5c7546f 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -274,6 +274,33 @@
> status = "disabled";
> };
>
> + esdhc: esdhc@2140000 {

'mmc' for node name, and the node should be sorted in unit-address.

> + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
> + reg = <0x0 0x2140000 0x0 0x10000>;
> + interrupts = <0 28 0x4>; /* Level high type */

interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;

> + clock-frequency = <0>; /* fixed up by bootloader */
> + clocks = <&clockgen 2 1>;
> + voltage-ranges = <1800 1800 3300 3300>;
> + sdhci,auto-cmd12;
> + little-endian;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> + esdhc1: esdhc@2150000 {
> + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
> + reg = <0x0 0x2150000 0x0 0x10000>;
> + interrupts = <0 63 0x4>; /* Level high type */
> + clock-frequency = <0>; /* fixed up by bootloader */
> + clocks = <&clockgen 2 1>;
> + voltage-ranges = <1800 1800 3300 3300>;
> + sdhci,auto-cmd12;
> + broken-cd;

Shouldn't this one be a board level property?

Shawn

> + little-endian;
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> sata: sata@3200000 {
> compatible = "fsl,ls1028a-ahci";
> reg = <0x0 0x3200000 0x0 0x10000>,
> --
> 1.7.1
>

\
 
 \ /
  Last update: 2019-05-23 09:39    [W:0.077 / U:13.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site