lkml.org 
[lkml]   [2019]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] PCI: aardvark: Use LTSSM state to build link training flag
Date
Aardvark's PCI_EXP_LNKSTA_LT flag in its link status register is not
implemented and does not reflect the actual link training state (the
flag is always set to 0). In order to support link re-training feature
this flag has to be emulated. The Link Training and Status State
Machine (LTSSM) flag in Aardvark LMI config register could be used as
a link training indicator. Indeed if the LTSSM is in L0 or upper state
then link training has completed (see [1]).

Unfortunately because after asking a link retraining it takes a while
for the LTSSM state to become less than 0x10 (due to L0s to recovery
state transition delays), LTSSM can still be in L0 while link training
has not finished yet. So this waits for link to be in recovery or lesser
state before returning after asking for a link retrain.

[1] "PCI Express Base Specification", REV. 4.0
PCI Express, February 19 2014, Table 4-14

Signed-off-by: Remi Pommarel <repk@triplefau.lt>
---
Changes since v1:
- Rename retraining flag field
- Fix DEVCTL register writing

Changes since v2:
- Rewrite patch logic so it is more legible

Please note that I will unlikely be able to answer any comments from May
24th to June 10th.
---
drivers/pci/controller/pci-aardvark.c | 29 ++++++++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 134e0306ff00..8803083b2174 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -180,6 +180,8 @@
#define LINK_WAIT_MAX_RETRIES 10
#define LINK_WAIT_USLEEP_MIN 90000
#define LINK_WAIT_USLEEP_MAX 100000
+#define RETRAIN_WAIT_MAX_RETRIES 10
+#define RETRAIN_WAIT_USLEEP_US 2000

#define MSI_IRQ_NUM 32

@@ -239,6 +241,17 @@ static int advk_pcie_wait_for_link(struct advk_pcie *pcie)
return -ETIMEDOUT;
}

+static void advk_pcie_wait_for_retrain(struct advk_pcie *pcie)
+{
+ size_t retries;
+
+ for (retries = 0; retries < RETRAIN_WAIT_MAX_RETRIES; ++retries) {
+ if (!advk_pcie_link_up(pcie))
+ break;
+ udelay(RETRAIN_WAIT_USLEEP_US);
+ }
+}
+
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
@@ -426,11 +439,20 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
return PCI_BRIDGE_EMUL_HANDLED;
}

+ case PCI_EXP_LNKCTL: {
+ /* u32 contains both PCI_EXP_LNKCTL and PCI_EXP_LNKSTA */
+ u32 val = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg) &
+ ~(PCI_EXP_LNKSTA_LT << 16);
+ if (!advk_pcie_link_up(pcie))
+ val |= (PCI_EXP_LNKSTA_LT << 16);
+ *value = val;
+ return PCI_BRIDGE_EMUL_HANDLED;
+ }
+
case PCI_CAP_LIST_ID:
case PCI_EXP_DEVCAP:
case PCI_EXP_DEVCTL:
case PCI_EXP_LNKCAP:
- case PCI_EXP_LNKCTL:
*value = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + reg);
return PCI_BRIDGE_EMUL_HANDLED;
default:
@@ -447,8 +469,13 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,

switch (reg) {
case PCI_EXP_DEVCTL:
+ advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
+ break;
+
case PCI_EXP_LNKCTL:
advk_writel(pcie, new, PCIE_CORE_PCIEXP_CAP + reg);
+ if (new & PCI_EXP_LNKCTL_RL)
+ advk_pcie_wait_for_retrain(pcie);
break;

case PCI_EXP_RTCTL:
--
2.20.1
\
 
 \ /
  Last update: 2019-05-22 23:27    [W:0.216 / U:7.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site