[lkml]   [2019]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 1/2] ARM: dts: rockchip: Add pin names for rk3288-veyron-minnie
Am Dienstag, 21. Mai 2019, 22:32:14 CEST schrieb Douglas Anderson:
> We can now use the "gpio-line-names" property to provide the names for
> all the pins on a board. Let's use this to provide the names for all
> the pins on rk3288-veyron-minnie.
> In general the names here come straight from the schematic. That
> means even if the schematic name is weird / doesn't have consistent
> naming conventions / has typos I still haven't made any changes.
> The exception here is for two pins: the recovery switch and the write
> protect detection pin. These two pins need to have standardized names
> since crossystem (a Chrome OS tool) uses these names to query the
> pins. In downstream kernels crossystem used an out-of-tree driver to
> do this but it has now been moved to the gpiod API and needs the
> standardized names.
> It's expected that other rk3288-veyron boards will get similar patches
> shortly.
> NOTE: I have sorted the "gpio" section to be next to the "pinctrl"
> section since it seems to logically make the most sense there.
> Signed-off-by: Douglas Anderson <>

applied both for 5.3 ... that is actually a pretty nifty feature for
boards whose schematics cannot be published :-)

 \ /
  Last update: 2019-05-22 10:03    [W:0.263 / U:1.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site