lkml.org 
[lkml]   [2019]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/7] serial: stm32: fix wakeup source initialization
Date
Fixes dedicated_irq_wakeup issue and deactivated uart as wakeup source by
default.

Fixes: 270e5a74fe4c ("serial: stm32: add wakeup mechanism")
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index d603be9..1334e42 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -557,7 +557,6 @@ static int stm32_startup(struct uart_port *port)
{
struct stm32_port *stm32_port = to_stm32_port(port);
struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
- struct stm32_usart_config *cfg = &stm32_port->info->cfg;
const char *name = to_platform_device(port->dev)->name;
u32 val;
int ret;
@@ -568,15 +567,6 @@ static int stm32_startup(struct uart_port *port)
if (ret)
return ret;

- if (cfg->has_wakeup && stm32_port->wakeirq >= 0) {
- ret = dev_pm_set_dedicated_wake_irq(port->dev,
- stm32_port->wakeirq);
- if (ret) {
- free_irq(port->irq, port);
- return ret;
- }
- }
-
val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
if (stm32_port->fifoen)
val |= USART_CR1_FIFOEN;
@@ -607,7 +597,6 @@ static void stm32_shutdown(struct uart_port *port)

stm32_clr_bits(port, ofs->cr1, val);

- dev_pm_clear_wake_irq(port->dev);
free_irq(port->irq, port);
}

@@ -1079,11 +1068,18 @@ static int stm32_serial_probe(struct platform_device *pdev)
ret = device_init_wakeup(&pdev->dev, true);
if (ret)
goto err_uninit;
+
+ ret = dev_pm_set_dedicated_wake_irq(&pdev->dev,
+ stm32port->wakeirq);
+ if (ret)
+ goto err_nowup;
+
+ device_set_wakeup_enable(&pdev->dev, false);
}

ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
if (ret)
- goto err_nowup;
+ goto err_wirq;

ret = stm32_of_dma_rx_probe(stm32port, pdev);
if (ret)
@@ -1097,6 +1093,10 @@ static int stm32_serial_probe(struct platform_device *pdev)

return 0;

+err_wirq:
+ if (stm32port->info->cfg.has_wakeup && stm32port->wakeirq >= 0)
+ dev_pm_clear_wake_irq(&pdev->dev);
+
err_nowup:
if (stm32port->info->cfg.has_wakeup && stm32port->wakeirq >= 0)
device_init_wakeup(&pdev->dev, false);
@@ -1134,8 +1134,10 @@ static int stm32_serial_remove(struct platform_device *pdev)
TX_BUF_L, stm32_port->tx_buf,
stm32_port->tx_dma_buf);

- if (cfg->has_wakeup && stm32_port->wakeirq >= 0)
+ if (cfg->has_wakeup && stm32_port->wakeirq >= 0) {
+ dev_pm_clear_wake_irq(&pdev->dev);
device_init_wakeup(&pdev->dev, false);
+ }

clk_disable_unprepare(stm32_port->clk);

--
1.9.1
\
 
 \ /
  Last update: 2019-05-21 17:47    [W:0.056 / U:2.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site