[lkml]   [2019]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] clk: meson: add support for Amlogic G12A
The Amlogic G12B SoC is very similar with the G12A SoC, sharing
most of the features and architecture.
G12B clock tree is very close, the main differences are :
- SYS_PLL is used for the second cluster (otherwise used fir the first on G12a)
- SYS_PLL1 is used for the first cluster (instead of SYS_PLL on G12a)
- A duplicate CPU tree is added for the second cluster
- G12A has additional clocks like for CSI an other components, not handled yet

Dependencies :
- Patch 1, 3 : None
- Patch 2 : Depends on Guillaume's Temperature sensor Clock patches at [1]

This patchset is a spinoff of the v2 Odroid-N2 megapatchset at [2]

Changes since original pathset :
- Added missing sys1_pll div16, cpub div16 and cpub atb/axi/ahb/trace clocks
- Rewrote "This patch .." in commit messages


Neil Armstrong (3):
dt-bindings: clk: meson: add g12b periph clock controller bindings
clk: meson: g12a: Add support for G12B CPUB clocks
clk: meson: g12a: mark fclk_div3 as critical

.../bindings/clock/amlogic,gxbb-clkc.txt | 1 +
drivers/clk/meson/g12a.c | 659 ++++++++++++++++++
drivers/clk/meson/g12a.h | 33 +-
3 files changed, 692 insertions(+), 1 deletion(-)


 \ /
  Last update: 2019-05-21 17:03    [W:0.074 / U:3.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site