lkml.org 
[lkml]   [2019]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: allwinner: a64: Add lradc node
On Tue, May 21, 2019 at 03:52:47PM +0200, luca@z3ntu.xyz wrote:
> On May 21, 2019 3:09:55 PM GMT+02:00, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >On Tue, May 21, 2019 at 08:43:45AM +0200, luca@z3ntu.xyz wrote:
> >> On May 20, 2019 1:07:42 PM GMT+02:00, Maxime Ripard
> ><maxime.ripard@bootlin.com> wrote:
> >> >On Sat, May 18, 2019 at 07:09:30PM +0200, Luca Weiss wrote:
> >> >> Add a node describing the KEYADC on the A64.
> >> >>
> >> >> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> >> >> ---
> >> >> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 7 +++++++
> >> >> 1 file changed, 7 insertions(+)
> >> >>
> >> >> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> >> >b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> >> >> index 7734f70e1057..dc1bf8c1afb5 100644
> >> >> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> >> >> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> >> >> @@ -704,6 +704,13 @@
> >> >> status = "disabled";
> >> >> };
> >> >>
> >> >> + lradc: lradc@1c21800 {
> >> >> + compatible = "allwinner,sun4i-a10-lradc-keys";
> >> >> + reg = <0x01c21800 0x100>;
> >> >> + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> >> >> + status = "disabled";
> >> >> + };
> >> >> +
> >> >
> >> >The controller is pretty different on the A64 compared to the A10.
> >The
> >> >A10 has two channels for example, while the A64 has only one.
> >> >
> >> >It looks like the one in the A83t though, so you can use that
> >> >compatible instead.
> >>
> >> Looking at the patch for the A83t, the only difference is that it
> >> uses a 3/4 instead of a 2/3 voltage divider, nothing is changed with
> >> the channels.
> >
> >I guess you can reuse the A83t compatible here then, and a more
> >specific a64 compatible in case we ever need to fix this.
> >
> >> But I'm also not sure which one (or a different one)
> >> is used from looking at the "A64 User Manual".
> >
> >I'm sorry, what are you referring to with "one" in that sentence?
>
> Sorry, I meant I didn't find anything in the A64 user manual whether
> a 3/4 or a 2/3 voltage divider (or one with different values) is
> used on the A64.

Ok :)

I guess you can just reuse the A83t compatible then, together with the
A64's.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-05-21 16:26    [W:0.087 / U:4.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site