lkml.org 
[lkml]   [2019]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 04/16] ioasid: Add custom IOASID allocator
From
Date
Hi Jacob,

On 5/4/19 12:32 AM, Jacob Pan wrote:
> Sometimes, IOASID allocation must be handled by platform specific
> code. The use cases are guest vIOMMU and pvIOMMU where IOASIDs need
> to be allocated by the host via enlightened or paravirt interfaces.
>
> This patch adds an extension to the IOASID allocator APIs such that
> platform drivers can register a custom allocator, possibly at boot
> time, to take over the allocation. Xarray is still used for tracking
> and searching purposes internal to the IOASID code. Private data of
> an IOASID can also be set after the allocation.
>
> There can be multiple custom allocators registered but only one is
> used at a time. In case of hot removal of devices that provides the
> allocator, all IOASIDs must be freed prior to unregistering the
> allocator. Default XArray based allocator cannot be mixed with
> custom allocators, i.e. custom allocators will not be used if there
> are outstanding IOASIDs allocated by the default XA allocator.
>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> ---
> drivers/iommu/ioasid.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 125 insertions(+)
>
> diff --git a/drivers/iommu/ioasid.c b/drivers/iommu/ioasid.c
> index 99f5e0a..ed2915a 100644
> --- a/drivers/iommu/ioasid.c
> +++ b/drivers/iommu/ioasid.c
> @@ -17,6 +17,100 @@ struct ioasid_data {
> };
>
> static DEFINE_XARRAY_ALLOC(ioasid_xa);
> +static DEFINE_MUTEX(ioasid_allocator_lock);
> +static struct ioasid_allocator *active_custom_allocator;
> +
> +static LIST_HEAD(custom_allocators);
> +/*
> + * A flag to track if ioasid default allocator is in use, this will
> + * prevent custom allocator from being used. The reason is that custom allocator
> + * must have unadulterated space to track private data with xarray, there cannot
> + * be a mix been default and custom allocated IOASIDs.
> + */
> +static int default_allocator_active;
> +
> +/**
> + * ioasid_register_allocator - register a custom allocator
> + * @allocator: the custom allocator to be registered
> + *
> + * Custom allocators take precedence over the default xarray based allocator.
> + * Private data associated with the ASID are managed by ASID common code
> + * similar to data stored in xa.
> + *
> + * There can be multiple allocators registered but only one is active. In case
> + * of runtime removal of a custom allocator, the next one is activated based
> + * on the registration ordering.
> + */
> +int ioasid_register_allocator(struct ioasid_allocator *allocator)
> +{
> + struct ioasid_allocator *pallocator;
> + int ret = 0;
> +
> + if (!allocator)
> + return -EINVAL;
is it really necessary? Sin't it the caller responsibility?
> +
> + mutex_lock(&ioasid_allocator_lock);
> + /*
> + * No particular preference since all custom allocators end up calling
> + * the host to allocate IOASIDs. We activate the first one and keep
> + * the later registered allocators in a list in case the first one gets
> + * removed due to hotplug.
> + */
> + if (list_empty(&custom_allocators))
> + active_custom_allocator = allocator;> + else {
> + /* Check if the allocator is already registered */
> + list_for_each_entry(pallocator, &custom_allocators, list) {
> + if (pallocator == allocator) {
> + pr_err("IOASID allocator already registered\n");
> + ret = -EEXIST;
> + goto out_unlock;
> + }
> + }
> + }
> + list_add_tail(&allocator->list, &custom_allocators);
> +
> +out_unlock:
> + mutex_unlock(&ioasid_allocator_lock);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(ioasid_register_allocator);
> +
> +/**
> + * ioasid_unregister_allocator - Remove a custom IOASID allocator
> + * @allocator: the custom allocator to be removed
> + *
> + * Remove an allocator from the list, activate the next allocator in
> + * the order it was registered.
> + */
> +void ioasid_unregister_allocator(struct ioasid_allocator *allocator)
> +{
> + if (!allocator)
> + return;
is it really necessary?
> +
> + if (list_empty(&custom_allocators)) {
> + pr_warn("No custom IOASID allocators active!\n");
> + return;
> + }
> +
> + mutex_lock(&ioasid_allocator_lock);
> + list_del(&allocator->list);
> + if (list_empty(&custom_allocators)) {
> + pr_info("No custom IOASID allocators\n")> + /*
> + * All IOASIDs should have been freed before the last custom
> + * allocator is unregistered. Unless default allocator is in
> + * use.
> + */
> + BUG_ON(!xa_empty(&ioasid_xa) && !default_allocator_active);
> + active_custom_allocator = NULL;
> + } else if (allocator == active_custom_allocator) {
In case you are removing the active custom allocator don't you also need
to check that all ioasids were freed. Otherwise you are likely to switch
to a different allocator whereas the asid space is partially populated.
> + active_custom_allocator = list_entry(&custom_allocators, struct ioasid_allocator, list);
> + pr_info("IOASID allocator changed");
> + }
> + mutex_unlock(&ioasid_allocator_lock);
> +}
> +EXPORT_SYMBOL_GPL(ioasid_unregister_allocator);
>
> /**
> * ioasid_set_data - Set private data for an allocated ioasid
> @@ -68,6 +162,29 @@ ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t min, ioasid_t max,
> data->set = set;
> data->private = private;
>
> + mutex_lock(&ioasid_allocator_lock);
> + /*
> + * Use custom allocator if available, otherwise use default.
> + * However, if there are active IOASIDs already been allocated by default
> + * allocator, custom allocator cannot be used.
> + */
> + if (!default_allocator_active && active_custom_allocator) {
> + id = active_custom_allocator->alloc(min, max, active_custom_allocator->pdata);
> + if (id == INVALID_IOASID) {
> + pr_err("Failed ASID allocation by custom allocator\n");
> + mutex_unlock(&ioasid_allocator_lock);
> + goto exit_free;
> + }
> + /*
> + * Use XA to manage private data also sanitiy check custom
> + * allocator for duplicates.
> + */
> + min = id;
> + max = id + 1;
> + } else
> + default_allocator_active = 1;
nit: true?
> + mutex_unlock(&ioasid_allocator_lock);
> +
> if (xa_alloc(&ioasid_xa, &id, data, XA_LIMIT(min, max), GFP_KERNEL)) {
> pr_err("Failed to alloc ioasid from %d to %d\n", min, max);
> goto exit_free;> @@ -91,9 +208,17 @@ void ioasid_free(ioasid_t ioasid)
> {
> struct ioasid_data *ioasid_data;
>
> + mutex_lock(&ioasid_allocator_lock);
> + if (active_custom_allocator)
> + active_custom_allocator->free(ioasid, active_custom_allocator->pdata);
> + mutex_unlock(&ioasid_allocator_lock);
> +
> ioasid_data = xa_erase(&ioasid_xa, ioasid);
>
> kfree_rcu(ioasid_data, rcu);
> +
> + if (xa_empty(&ioasid_xa))
> + default_allocator_active = 0;
Isn't it racy? what if an xa_alloc occurs inbetween?


> }
> EXPORT_SYMBOL_GPL(ioasid_free);
>
>

Thanks

Eric

\
 
 \ /
  Last update: 2019-05-21 11:57    [W:0.135 / U:6.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site