lkml.org 
[lkml]   [2019]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 2/6] net: stmmac: sun8i: force select external PHY when no internal one
From
Date
Hello!

On 21.05.2019 2:50, megous@megous.com wrote:

> From: Icenowy Zheng <icenowy@aosc.io>
>
> The PHY selection bit also exists on SoCs without an internal PHY; if it's
> set to 1 (internal PHY, default value) then the MAC will not make use of
> any PHY such SoCs.
^ "on" or "with" missing?

> This problem appears when adapting for H6, which has no real internal PHY
> (the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip,
> connected via RMII interface at GPIO bank A).
>
> Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY,
> to address the problem of a wrong default value.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
[...]

MBR, Sergei

\
 
 \ /
  Last update: 2019-05-21 11:28    [W:0.157 / U:10.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site