lkml.org 
[lkml]   [2019]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V3 2/2] irqchip/irq-csky-mpintc: Add triger type and priority
From
Date
On 21/05/2019 08:22, Guo Ren wrote:
> Hi Marc,
> ping ... Any problem ?

Pinging me twice in four days for a patch posted in the middle of the
merge window is a problem, yes. In general, do not post such patches
during the merge window, unless this is an urgent fix. Everybody is busy
unbreaking the tree.

>
> Thx
> Guo Ren
>
> <guoren@kernel.org> 于2019年5月13日周一 下午5:55写道:
>>
>> From: Guo Ren <ren_guo@c-sky.com>
>>
>> Support 4 triger types:
>> - IRQ_TYPE_LEVEL_HIGH
>> - IRQ_TYPE_LEVEL_LOW
>> - IRQ_TYPE_EDGE_RISING
>> - IRQ_TYPE_EDGE_FALLING
>>
>> Support 0-255 priority setting for each irq.
>>
>> All of above could be set in DeviceTree file and it still compatible
>> with the old DeviceTree format.
>>
>> Changes for V3:
>> - Use IRQ_TYPE_LEVEL_HIGH as default instead of IRQ_TYPE_NONE
>> - Remove unnecessary loop in csky_mpintc_handler
>>
>> Changes for V2:
>> - Fixup this_cpu_read() preempted problem.
>> - Optimize the coding style.
>>
>> Signed-off-by: Guo Ren <ren_guo@c-sky.com>
>> Cc: Marc Zyngier <marc.zyngier@arm.com>
>> ---
>> drivers/irqchip/irq-csky-mpintc.c | 113 +++++++++++++++++++++++++++++++++++---
>> 1 file changed, 106 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-csky-mpintc.c b/drivers/irqchip/irq-csky-mpintc.c
>> index c67c961..5bc0868 100644
>> --- a/drivers/irqchip/irq-csky-mpintc.c
>> +++ b/drivers/irqchip/irq-csky-mpintc.c
>> @@ -17,6 +17,7 @@
>> #include <asm/reg_ops.h>
>>
>> static struct irq_domain *root_domain;
>> +
>> static void __iomem *INTCG_base;
>> static void __iomem *INTCL_base;
>>
>> @@ -29,11 +30,13 @@ static void __iomem *INTCL_base;
>>
>> #define INTCG_ICTLR 0x0
>> #define INTCG_CICFGR 0x100
>> +#define INTCG_CIPRTR 0x200
>> #define INTCG_CIDSTR 0x1000
>>
>> #define INTCL_PICTLR 0x0
>> +#define INTCL_CFGR 0x14
>> +#define INTCL_PRTR 0x20
>> #define INTCL_SIGR 0x60
>> -#define INTCL_HPPIR 0x68
>> #define INTCL_RDYIR 0x6c
>> #define INTCL_SENR 0xa0
>> #define INTCL_CENR 0xa4
>> @@ -41,21 +44,66 @@ static void __iomem *INTCL_base;
>>
>> static DEFINE_PER_CPU(void __iomem *, intcl_reg);
>>
>> +static unsigned long *__trigger;
>> +static unsigned long *__priority;
>> +
>> +#define IRQ_OFFSET(irq) ((irq < COMM_IRQ_BASE) ? irq : (irq - COMM_IRQ_BASE))
>> +
>> +#define TRIG_BYTE_OFFSET(i) ((((i) * 2) / 32) * 4)
>> +#define TRIG_BIT_OFFSET(i) (((i) * 2) % 32)
>> +
>> +#define PRI_BYTE_OFFSET(i) ((((i) * 8) / 32) * 4)
>> +#define PRI_BIT_OFFSET(i) (((i) * 8) % 32)
>> +
>> +#define TRIG_VAL(trigger, irq) (trigger << TRIG_BIT_OFFSET(IRQ_OFFSET(irq)))
>> +#define TRIG_VAL_MSK(irq) (~(3 << TRIG_BIT_OFFSET(IRQ_OFFSET(irq))))
>> +#define PRI_VAL(priority, irq) (priority << PRI_BIT_OFFSET(IRQ_OFFSET(irq)))
>> +#define PRI_VAL_MSK(irq) (~(0xff << PRI_BIT_OFFSET(IRQ_OFFSET(irq))))
>> +
>> +#define TRIG_BASE(irq) \
>> + (TRIG_BYTE_OFFSET(IRQ_OFFSET(irq)) + ((irq < COMM_IRQ_BASE) ? \
>> + (this_cpu_read(intcl_reg) + INTCL_CFGR) : (INTCG_base + INTCG_CICFGR)))
>> +
>> +#define PRI_BASE(irq) \
>> + (PRI_BYTE_OFFSET(IRQ_OFFSET(irq)) + ((irq < COMM_IRQ_BASE) ? \
>> + (this_cpu_read(intcl_reg) + INTCL_PRTR) : (INTCG_base + INTCG_CIPRTR)))
>> +
>> +static DEFINE_SPINLOCK(setup_lock);
>> +static void setup_trigger_priority(unsigned long irq, unsigned long trigger,
>> + unsigned long priority)
>> +{
>> + unsigned int tmp;
>> +
>> + spin_lock(&setup_lock);
>> +
>> + /* setup trigger */
>> + tmp = readl_relaxed(TRIG_BASE(irq)) & TRIG_VAL_MSK(irq);
>> +
>> + writel_relaxed(tmp | TRIG_VAL(trigger, irq), TRIG_BASE(irq));
>> +
>> + /* setup priority */
>> + tmp = readl_relaxed(PRI_BASE(irq)) & PRI_VAL_MSK(irq);
>> +
>> + writel_relaxed(tmp | PRI_VAL(priority, irq), PRI_BASE(irq));
>> +
>> + spin_unlock(&setup_lock);
>> +}
>> +
>> static void csky_mpintc_handler(struct pt_regs *regs)
>> {
>> void __iomem *reg_base = this_cpu_read(intcl_reg);
>>
>> - do {
>> - handle_domain_irq(root_domain,
>> - readl_relaxed(reg_base + INTCL_RDYIR),
>> - regs);
>> - } while (readl_relaxed(reg_base + INTCL_HPPIR) & BIT(31));
>> + handle_domain_irq(root_domain,
>> + readl_relaxed(reg_base + INTCL_RDYIR), regs);

This seems to be an unrelated change.

>> }
>>
>> static void csky_mpintc_enable(struct irq_data *d)
>> {
>> void __iomem *reg_base = this_cpu_read(intcl_reg);
>>
>> + setup_trigger_priority(d->hwirq, __trigger[d->hwirq],
>> + __priority[d->hwirq]);
>> +
>> writel_relaxed(d->hwirq, reg_base + INTCL_SENR);
>> }
>>
>> @@ -73,6 +121,28 @@ static void csky_mpintc_eoi(struct irq_data *d)
>> writel_relaxed(d->hwirq, reg_base + INTCL_CACR);
>> }
>>
>> +static int csky_mpintc_set_type(struct irq_data *d, unsigned int type)
>> +{
>> + switch (type & IRQ_TYPE_SENSE_MASK) {
>> + case IRQ_TYPE_LEVEL_HIGH:
>> + __trigger[d->hwirq] = 0;
>> + break;
>> + case IRQ_TYPE_LEVEL_LOW:
>> + __trigger[d->hwirq] = 1;
>> + break;
>> + case IRQ_TYPE_EDGE_RISING:
>> + __trigger[d->hwirq] = 2;
>> + break;
>> + case IRQ_TYPE_EDGE_FALLING:
>> + __trigger[d->hwirq] = 3;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> #ifdef CONFIG_SMP
>> static int csky_irq_set_affinity(struct irq_data *d,
>> const struct cpumask *mask_val,
>> @@ -105,6 +175,7 @@ static struct irq_chip csky_irq_chip = {
>> .irq_eoi = csky_mpintc_eoi,
>> .irq_enable = csky_mpintc_enable,
>> .irq_disable = csky_mpintc_disable,
>> + .irq_set_type = csky_mpintc_set_type,
>> #ifdef CONFIG_SMP
>> .irq_set_affinity = csky_irq_set_affinity,
>> #endif
>> @@ -125,9 +196,29 @@ static int csky_irqdomain_map(struct irq_domain *d, unsigned int irq,
>> return 0;
>> }
>>
>> +static int csky_irq_domain_xlate_cells(struct irq_domain *d,
>> + struct device_node *ctrlr, const u32 *intspec,
>> + unsigned int intsize, unsigned long *out_hwirq,
>> + unsigned int *out_type)
>> +{
>> + if (WARN_ON(intsize < 1))
>> + return -EINVAL;
>> +
>> + *out_hwirq = intspec[0];
>> + if (intsize > 1)
>> + *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
>> + else
>> + *out_type = IRQ_TYPE_LEVEL_HIGH;
>> +
>> + if (intsize > 2)
>> + __priority[*out_hwirq] = intspec[2];

You keep doing this, and I keep objecting to it. Linux doesn't support
interrupt priorities, and yet you keep bringing them back. Why don't you
simply ignore that field and stick all priorities to some arbitrary value?

Thanks,

M.
--
Jazz is not dead. It just smells funny...

\
 
 \ /
  Last update: 2019-05-21 10:54    [W:0.067 / U:2.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site