lkml.org 
[lkml]   [2019]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 3/3] i2c-ocores: sifive: add polling mode workaround for FU540-C000 SoC.
On Mon, May 20, 2019 at 8:22 PM Andrew Lunn <andrew@lunn.ch> wrote:
>
> On Mon, May 20, 2019 at 07:41:18PM +0530, Sagar Shrikant Kadam wrote:
> > The i2c-ocore driver already has a polling mode interface.But it needs
> > a workaround for FU540 Chipset on HiFive unleashed board (RevA00).
> > There is an erratum in FU540 chip that prevents interrupt driven i2c
> > transfers from working, and also the I2C controller's interrupt bit
> > cannot be cleared if set, due to this the existing i2c polling mode
> > interface added in mainline earlier doesn't work, and CPU stall's
> > infinitely, when-ever i2c transfer is initiated.
> >
> > Ref:previous polling mode support in mainline
> >
> > commit 69c8c0c0efa8 ("i2c: ocores: add polling interface")
> >
> > The workaround / fix under OCORES_FLAG_BROKEN_IRQ is particularly for
> > FU540-COOO SoC.
> >
> > Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
>
> Much better, thanks.
My pleasure Andrew.
Appreciate your timely review and response.

>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
>
> Andrew

Thanks,
Sagar

\
 
 \ /
  Last update: 2019-05-20 17:20    [W:0.030 / U:4.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site