[lkml]   [2019]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 1/1] ARM: dts: meson8b: fix the operating voltage of the Mali GPU
Martin Blumenstingl <> writes:

> Amlogic's vendor kernel defines an OPP for the GPU on Meson8b boards
> with a voltage of 1.15V. It turns out that the vendor kernel relies on
> the bootloader to set up the voltage. The bootloader however sets a
> fixed voltage of 1.10V.
> Amlogic's patched u-boot sources (uboot-2015-01-15-23a3562521) confirm
> this:
> $ grep -oiE "VDD(EE|AO)_VOLTAGE[ ]+[0-9]+" board/amlogic/configs/m8b_*
> board/amlogic/configs/m8b_m100_v1.h:VDDAO_VOLTAGE 1100
> board/amlogic/configs/m8b_m101_v1.h:VDDAO_VOLTAGE 1100
> board/amlogic/configs/m8b_m102_v1.h:VDDAO_VOLTAGE 1100
> board/amlogic/configs/m8b_m200_v1.h:VDDAO_VOLTAGE 1100
> board/amlogic/configs/m8b_m201_v1.h:VDDEE_VOLTAGE 1100
> board/amlogic/configs/m8b_m201_v1.h:VDDEE_VOLTAGE 1100
> board/amlogic/configs/m8b_m202_v1.h:VDDEE_VOLTAGE 1100
> Another hint at this is the VDDEE voltage on the EC-100 and Odroid-C1
> boards. The VDDEE regulator supplies the Mali GPU. It's basically a copy
> of the VCCK (CPU supply) which means it's limited to 0.86V to 1.14V.
> Update the operating voltage of the Mali GPU on Meson8b to 1.10V so it
> matches with what the vendor u-boot sets.
> Fixes: c3ea80b6138cae ("ARM: dts: meson8b: add the Mali-450 MP2 GPU")
> Signed-off-by: Martin Blumenstingl <>

Queued as a fix for v5.2-rc (branch: v5.2/fixes)


 \ /
  Last update: 2019-05-15 02:03    [W:0.035 / U:2.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site