[lkml]   [2019]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/2] hwmon: Add TI ads1000/ads1100 driver package
This a simple single-channel ADC device similar to ads1100 series,
but with much less capabilities. These ADCs are working over i2c-interface
with just one differential input and with configurable 12-16 bits
resolution. Sample rate is fixed to 128 for ads1000 and can vary from 8
to 128 for ads1100. Vdd value reference value must be supplied so to
properly translate the sampled code to the real voltage.

Even though ads1000/ads1100 devices seem more like ads1015 series, they
in fact pretty much different. First of all ads1000/ads1100 got less
capabilities: just one port, no configurations of digital comparator, no
input multi-channel multiplexer, smaller PGA and data-rate ranges.
In addition they haven't got internal voltage reference, but instead
are created to use Vdd pin voltage. Finally the output code value is
provided in different format. As a result it was much easier for
development and for future support to create a separate driver, which
is opensoureced by means of this patchset.

Signed-off-by: Serge Semin <>

Serge Semin (2):
dt-bindings: hwmon: Add DT bindings for TI ads1000/ads1100 ADCs
hwmon: Add ads1000/ads1100 voltage ADCs driver

.../devicetree/bindings/hwmon/ads1000.txt | 61 ++++
Documentation/hwmon/ads1000.rst | 72 ++++
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/ads1000.c | 320 ++++++++++++++++++
include/linux/platform_data/ads1000.h | 20 ++
7 files changed, 492 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/ads1000.txt
create mode 100644 Documentation/hwmon/ads1000.rst
create mode 100644 drivers/hwmon/ads1000.c
create mode 100644 include/linux/platform_data/ads1000.h


 \ /
  Last update: 2019-05-15 00:59    [W:0.066 / U:29.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site