lkml.org 
[lkml]   [2019]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] clk: meson: g12a: fix gp0 and hifi ranges
On Mon, May 13, 2019 at 2:45 PM Jerome Brunet <jbrunet@baylibre.com> wrote:
>
> While some SoC samples are able to lock with a PLL factor of 55, others
> samples can't. ATM, a minimum of 60 appears to work on all the samples
> I have tried.
>
> Even with 60, it sometimes takes a long time for the PLL to eventually
> lock. The documentation says that the minimum rate of these PLLs DCO
> should be 3GHz, a factor of 125. Let's use that to be on the safe side.
>
> With factor range changed, the PLL seems to lock quickly (enough) so far.
> It is still unclear if the range was the only reason for the delay.
>
> Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
this matches with what Amlogic does in their 4.9 vendor kernel from
buildroot-openlinux-A113-201901:
$ grep -P "\tPLL_RATE" kernel/aml-4.9/drivers/amlogic/clk/g12a/g12a.h
| cut -d',' -f2 | tr -s " " | sort -u | head -n5
125
126
128
129
132

based on that:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

\
 
 \ /
  Last update: 2019-05-14 20:15    [W:0.035 / U:6.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site