lkml.org 
[lkml]   [2019]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: meson: g12a: set uart_ao clocks
From
Date
On 14/05/2019 11:45, Jerome Brunet wrote:
> Now that the AO clock controller is available, make the uarts of the
> always-on domain claim the appropriate peripheral clock.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> index b2f08fc96568..ca01064a771a 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> @@ -708,7 +708,7 @@
> "amlogic,meson-ao-uart";
> reg = <0x0 0x3000 0x0 0x18>;
> interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
> - clocks = <&xtal>, <&xtal>, <&xtal>;
> + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>;
> clock-names = "xtal", "pclk", "baud";
> status = "disabled";
> };
> @@ -718,7 +718,7 @@
> "amlogic,meson-ao-uart";
> reg = <0x0 0x4000 0x0 0x18>;
> interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
> - clocks = <&xtal>, <&xtal>, <&xtal>;
> + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
> clock-names = "xtal", "pclk", "baud";
> status = "disabled";
> };
>

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

\
 
 \ /
  Last update: 2019-05-14 12:23    [W:0.041 / U:3.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site