lkml.org 
[lkml]   [2019]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7 12/23] iommu/smmuv3: Get prepared for nested stage support
From
Date
On 10/05/2019 15:34, Auger Eric wrote:
> Hi Robin,
>
> On 5/8/19 4:24 PM, Robin Murphy wrote:
>> On 08/04/2019 13:19, Eric Auger wrote:
>>> To allow nested stage support, we need to store both
>>> stage 1 and stage 2 configurations (and remove the former
>>> union).
>>>
>>> A nested setup is characterized by both s1_cfg and s2_cfg
>>> set.
>>>
>>> We introduce a new ste.abort field that will be set upon
>>> guest stage1 configuration passing. If s1_cfg is NULL and
>>> ste.abort is set, traffic can't pass. If ste.abort is not set,
>>> S1 is bypassed.
>>>
>>> arm_smmu_write_strtab_ent() is modified to write both stage
>>> fields in the STE and deal with the abort field.
>>>
>>> In nested mode, only stage 2 is "finalized" as the host does
>>> not own/configure the stage 1 context descriptor, guest does.
>>>
>>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>>>
>>> ---
>>>
>>> v4 -> v5:
>>> - reset ste.abort on detach
>>>
>>> v3 -> v4:
>>> - s1_cfg.nested_abort and nested_bypass removed.
>>> - s/ste.nested/ste.abort
>>> - arm_smmu_write_strtab_ent modifications with introduction
>>>    of local abort, bypass and translate local variables
>>> - comment updated
>>>
>>> v1 -> v2:
>>> - invalidate the STE before moving from a live STE config to another
>>> - add the nested_abort and nested_bypass fields
>>> ---
>>>   drivers/iommu/arm-smmu-v3.c | 35 ++++++++++++++++++++---------------
>>>   1 file changed, 20 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
>>> index 21d027695181..e22e944ffc05 100644
>>> --- a/drivers/iommu/arm-smmu-v3.c
>>> +++ b/drivers/iommu/arm-smmu-v3.c
>>> @@ -211,6 +211,7 @@
>>>   #define STRTAB_STE_0_CFG_BYPASS        4
>>>   #define STRTAB_STE_0_CFG_S1_TRANS    5
>>>   #define STRTAB_STE_0_CFG_S2_TRANS    6
>>> +#define STRTAB_STE_0_CFG_NESTED        7
>>>     #define STRTAB_STE_0_S1FMT        GENMASK_ULL(5, 4)
>>>   #define STRTAB_STE_0_S1FMT_LINEAR    0
>>> @@ -514,6 +515,7 @@ struct arm_smmu_strtab_ent {
>>>        * configured according to the domain type.
>>>        */
>>>       bool                assigned;
>>> +    bool                abort;
>>>       struct arm_smmu_s1_cfg        *s1_cfg;
>>>       struct arm_smmu_s2_cfg        *s2_cfg;
>>>   };
>>> @@ -628,10 +630,8 @@ struct arm_smmu_domain {
>>>       bool                non_strict;
>>>         enum arm_smmu_domain_stage    stage;
>>> -    union {
>>> -        struct arm_smmu_s1_cfg    s1_cfg;
>>> -        struct arm_smmu_s2_cfg    s2_cfg;
>>> -    };
>>> +    struct arm_smmu_s1_cfg    s1_cfg;
>>> +    struct arm_smmu_s2_cfg    s2_cfg;
>>>         struct iommu_domain        domain;
>>>   @@ -1108,12 +1108,13 @@ static void arm_smmu_write_strtab_ent(struct
>>> arm_smmu_device *smmu, u32 sid,
>>>                         __le64 *dst, struct arm_smmu_strtab_ent *ste)
>>>   {
>>>       /*
>>> -     * This is hideously complicated, but we only really care about
>>> -     * three cases at the moment:
>>> +     * We care about the following transitions:
>>>        *
>>>        * 1. Invalid (all zero) -> bypass/fault (init)
>>> -     * 2. Bypass/fault -> translation/bypass (attach)
>>> -     * 3. Translation/bypass -> bypass/fault (detach)
>>> +     * 2. Bypass/fault -> single stage translation/bypass (attach)
>>> +     * 3. single stage Translation/bypass -> bypass/fault (detach)
>>> +     * 4. S2 -> S1 + S2 (attach_pasid_table)
>>> +     * 5. S1 + S2 -> S2 (detach_pasid_table)
>>>        *
>>>        * Given that we can't update the STE atomically and the SMMU
>>>        * doesn't read the thing in a defined order, that leaves us
>>> @@ -1124,7 +1125,7 @@ static void arm_smmu_write_strtab_ent(struct
>>> arm_smmu_device *smmu, u32 sid,
>>>        * 3. Update Config, sync
>>>        */
>>>       u64 val = le64_to_cpu(dst[0]);
>>> -    bool ste_live = false;
>>> +    bool abort, bypass, translate, ste_live = false;
>>>       struct arm_smmu_cmdq_ent prefetch_cmd = {
>>>           .opcode        = CMDQ_OP_PREFETCH_CFG,
>>>           .prefetch    = {
>>> @@ -1138,11 +1139,11 @@ static void arm_smmu_write_strtab_ent(struct
>>> arm_smmu_device *smmu, u32 sid,
>>>               break;
>>>           case STRTAB_STE_0_CFG_S1_TRANS:
>>>           case STRTAB_STE_0_CFG_S2_TRANS:
>>> +        case STRTAB_STE_0_CFG_NESTED:
>>>               ste_live = true;
>>>               break;
>>>           case STRTAB_STE_0_CFG_ABORT:
>>> -            if (disable_bypass)
>>> -                break;
>>> +            break;
>>>           default:
>>>               BUG(); /* STE corruption */
>>>           }
>>> @@ -1152,8 +1153,13 @@ static void arm_smmu_write_strtab_ent(struct
>>> arm_smmu_device *smmu, u32 sid,
>>>       val = STRTAB_STE_0_V;
>>>         /* Bypass/fault */
>>> -    if (!ste->assigned || !(ste->s1_cfg || ste->s2_cfg)) {
>>> -        if (!ste->assigned && disable_bypass)
>>> +
>>> +    abort = (!ste->assigned && disable_bypass) || ste->abort;
>>> +    translate = ste->s1_cfg || ste->s2_cfg;
>>> +    bypass = !abort && !translate;
>>> +
>>> +    if (abort || bypass) {
>>> +        if (abort)
>>>               val |= FIELD_PREP(STRTAB_STE_0_CFG,
>>> STRTAB_STE_0_CFG_ABORT);
>>>           else
>>>               val |= FIELD_PREP(STRTAB_STE_0_CFG,
>>> STRTAB_STE_0_CFG_BYPASS);
>>> @@ -1172,7 +1178,6 @@ static void arm_smmu_write_strtab_ent(struct
>>> arm_smmu_device *smmu, u32 sid,
>>>       }
>>>         if (ste->s1_cfg) {
>>> -        BUG_ON(ste_live);
>>
>> Hmm, I'm a little uneasy about just removing these checks altogether, as
>> there are still cases where rewriting a live entry is bogus, that we'd
>> really like to keep catching. Is the problem that it's hard to tell when
>> you're 'rewriting' the S2 config of a nested entry with the same thing
>> on attaching/detaching its S1 context?
> No, I restored the original checks in !nested mode and added a new check
> to make sure we never update a live S1 in nested mode. Only S2 can be live.

Right, either way it's fairly easy to enforce "!(cfg->s1 && ste->s1)",
but what I'm really concerned about is that fact where Stream IDs (or
possibly PASIDS) get messed up and we end up silently writing a nested
config over an STE which happens to already have an S2 configuration for
some other domain (or vice versa).

I guess it might suffice to verify that the VTTBRs match for S2<->nested
transitions, what do you reckon?

Robin.

\
 
 \ /
  Last update: 2019-05-13 13:44    [W:0.062 / U:1.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site