lkml.org 
[lkml]   [2019]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] mtd: rawnand: Add Macronix NAND read retry support
Date
Add a driver for Macronix NAND read retry.

Macronix NAND supports specfical read for data recovery and enabled
it by Set Feature.
Driver check byte 167 of Vendor Blocks in ONFI parameter page table
to see if this high reliability function is support or not.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
---
drivers/mtd/nand/raw/nand_macronix.c | 52 ++++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)

diff --git a/drivers/mtd/nand/raw/nand_macronix.c b/drivers/mtd/nand/raw/nand_macronix.c
index 47d8cda..5cd1e5f 100644
--- a/drivers/mtd/nand/raw/nand_macronix.c
+++ b/drivers/mtd/nand/raw/nand_macronix.c
@@ -17,6 +17,57 @@

#include "internals.h"

+#define MACRONIX_READ_RETRY_BIT BIT(0)
+#define MACRONIX_READ_RETRY_MODE 5
+
+struct nand_onfi_vendor_macronix {
+ u8 reserved[1];
+ u8 reliability_func;
+} __packed;
+
+static int macronix_nand_setup_read_retry(struct nand_chip *chip, int mode)
+{
+ u8 feature[ONFI_SUBFEATURE_PARAM_LEN] = {0};
+ int ret;
+
+ if (mode > MACRONIX_READ_RETRY_MODE)
+ mode = MACRONIX_READ_RETRY_MODE;
+
+ feature[0] = mode;
+ ret = nand_set_features(chip, ONFI_FEATURE_ADDR_READ_RETRY, feature);
+ if (ret)
+ pr_err("set feature failed to read retry moded:%d\n", mode);
+
+ ret = nand_get_features(chip, ONFI_FEATURE_ADDR_READ_RETRY, feature);
+ if (ret || feature[0] != mode)
+ pr_err("get feature failed to read retry moded:%d(%d)\n",
+ mode, feature[0]);
+
+ return ret;
+}
+
+static void macronix_nand_onfi_init(struct nand_chip *chip)
+{
+ struct nand_parameters *p = &chip->parameters;
+
+ if (p->onfi) {
+ struct nand_onfi_vendor_macronix *mxic =
+ (void *)p->onfi->vendor;
+
+ if (mxic->reliability_func & MACRONIX_READ_RETRY_BIT) {
+ chip->read_retries = MACRONIX_READ_RETRY_MODE + 1;
+ chip->setup_read_retry =
+ macronix_nand_setup_read_retry;
+ if (p->supports_set_get_features) {
+ set_bit(ONFI_FEATURE_ADDR_READ_RETRY,
+ p->set_feature_list);
+ set_bit(ONFI_FEATURE_ADDR_READ_RETRY,
+ p->get_feature_list);
+ }
+ }
+ }
+}
+
/*
* Macronix AC series does not support using SET/GET_FEATURES to change
* the timings unlike what is declared in the parameter page. Unflag
@@ -65,6 +116,7 @@ static int macronix_nand_init(struct nand_chip *chip)
chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;

macronix_nand_fix_broken_get_timings(chip);
+ macronix_nand_onfi_init(chip);

return 0;
}
--
1.9.1
\
 
 \ /
  Last update: 2019-05-10 09:19    [W:0.083 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site