lkml.org 
[lkml]   [2019]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/6] regulator: lm363x: Make the gpio register enable flexible
From
Date
Hi Dan,

Regulator maintainers should be added too.

On 4/5/19 4:55 PM, Dan Murphy wrote:
> The use of and enablement of the GPIO can be used across devices.
> Use the enable_reg in the regulator descriptor for the register to
> write.
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> drivers/regulator/lm363x-regulator.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
> index c876e161052a..382b1cecdd93 100644
> --- a/drivers/regulator/lm363x-regulator.c
> +++ b/drivers/regulator/lm363x-regulator.c
> @@ -263,8 +263,8 @@ static int lm363x_regulator_probe(struct platform_device *pdev)
>
> if (gpiod) {
> cfg.ena_gpiod = gpiod;
> -
> - ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG,
> + ret = regmap_update_bits(regmap,
> + lm363x_regulator_desc[id].enable_reg,
> LM3632_EXT_EN_MASK,
> LM3632_EXT_EN_MASK);
> if (ret) {
>

--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2019-04-09 20:45    [W:0.069 / U:9.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site