lkml.org 
[lkml]   [2019]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] spi: pxa2xx: add driver enabling message
From
Date
Hi

On 4/8/19 6:22 PM, Flavio Suligoi wrote:
> Add an info message for the PXA2xx device driver start-up,
> with the indication of the transfer mode used (DMA or GPIO).
>
> This info is useful to individuate the timing when
> the module starts.
>
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> ---
> drivers/spi/spi-pxa2xx.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
> index f7068cc..d449501 100644
> --- a/drivers/spi/spi-pxa2xx.c
> +++ b/drivers/spi/spi-pxa2xx.c
> @@ -1826,6 +1826,9 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
> goto out_error_clock_enabled;
> }
>
> + dev_info(dev, "PXA2xx SPI master controller (%s mode)\n",
> + platform_info->enable_dma ? "DMA" : "PIO");
> +
> return status;
>
Would this look better if moved before devm_spi_register_controller() call?

--
Jarkko

\
 
 \ /
  Last update: 2019-04-09 15:49    [W:0.121 / U:30.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site