lkml.org 
[lkml]   [2019]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/5] usb: gadget: udc: lpc32xx: rework interrupt handling
Date
There is no actual need to do the enable/disable_irq dance. Instead enable
the interrupts on the phy only when necessary.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/usb/gadget/udc/lpc32xx_udc.c | 29 ++++++++++------------------
1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 5d6246d23b99..d8f1c60793ed 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -617,17 +617,13 @@ static void isp1301_udc_configure(struct lpc32xx_udc *udc)
(ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
OTG1_VBUS_DISCHRG);

- /* Clear and enable VBUS high edge interrupt */
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
- i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_FALLING, INT_SESS_VLD | INT_VBUS_VLD);
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
- i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
- ISP1301_I2C_INTERRUPT_RISING, INT_SESS_VLD | INT_VBUS_VLD);

dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n", vendor);
dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n", product);
@@ -2887,9 +2883,6 @@ static void vbus_work(struct lpc32xx_udc *udc)
lpc32xx_vbus_session(&udc->gadget, udc->vbus);
}
}
-
- /* Re-enable after completion */
- enable_irq(udc->udp_irq[IRQ_USB_ATX]);
}

static irqreturn_t lpc32xx_usb_vbus_irq(int irq, void *_udc)
@@ -2905,7 +2898,6 @@ static int lpc32xx_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
struct lpc32xx_udc *udc = to_udc(gadget);
- int i;

if (!driver || driver->max_speed < USB_SPEED_FULL || !driver->setup) {
dev_err(udc->dev, "bad parameter.\n");
@@ -2927,20 +2919,23 @@ static int lpc32xx_start(struct usb_gadget *gadget,
udc->last_vbus = udc->vbus = 0;
vbus_work(udc);

- /* Do not re-enable ATX IRQ (3) */
- for (i = IRQ_USB_LP; i < IRQ_USB_ATX; i++)
- enable_irq(udc->udp_irq[i]);
+ /* enable interrupts */
+ i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+ ISP1301_I2C_INTERRUPT_FALLING, INT_SESS_VLD | INT_VBUS_VLD);
+ i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+ ISP1301_I2C_INTERRUPT_RISING, INT_SESS_VLD | INT_VBUS_VLD);

return 0;
}

static int lpc32xx_stop(struct usb_gadget *gadget)
{
- int i;
struct lpc32xx_udc *udc = to_udc(gadget);

- for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++)
- disable_irq(udc->udp_irq[i]);
+ i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+ ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
+ i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
+ ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);

if (udc->clocked) {
spin_lock(&udc->lock);
@@ -3172,10 +3167,6 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
init_waitqueue_head(&udc->ep_disable_wait_queue);
atomic_set(&udc->enabled_ep_cnt, 0);

- /* Keep all IRQs disabled until GadgetFS starts up */
- for (i = IRQ_USB_LP; i <= IRQ_USB_ATX; i++)
- disable_irq(udc->udp_irq[i]);
-
retval = usb_add_gadget_udc(dev, &udc->gadget);
if (retval < 0)
goto add_gadget_fail;
--
2.20.1
\
 
 \ /
  Last update: 2019-04-09 14:09    [W:0.062 / U:2.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site