lkml.org 
[lkml]   [2019]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] dt-bindings: cpufreq: Document operating-points-v2-sunxi-cpu
On 05-04-19, 06:24, Yangtao Li wrote:
> +++ b/Documentation/devicetree/bindings/opp/sunxi-nvmem-cpufreq.txt
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <0>;
> + enable-method = "psci";
> + clocks = <&ccu CLK_CPUX>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu1: cpu@1 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <1>;
> + enable-method = "psci";
> + clocks = <&ccu CLK_CPUX>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu2: cpu@2 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <2>;
> + enable-method = "psci";
> + clocks = <&ccu CLK_CPUX>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu3: cpu@3 {
> + compatible = "arm,cortex-a53";
> + device_type = "cpu";
> + reg = <3>;
> + enable-method = "psci";
> + clocks = <&ccu CLK_CPUX>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> + };
> + };
> +
> + cpu_opp_table: opp_table {
> + compatible = "operating-points-v2-sunxi-cpu";
> + nvmem-cells = <&speedbin_efuse>;
> + opp-shared;
> +
> + opp-480000000-0 {
> + opp-hz = /bits/ 64 <480000000>;
> + opp-microvolt = <880000>;
> + opp-supported-hw = <0x1>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-720000000-0 {
> + opp-hz = /bits/ 64 <720000000>;
> + opp-microvolt = <880000>;
> + opp-supported-hw = <0x1>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-816000000-0 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <880000>;
> + opp-supported-hw = <0x1>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-888000000-0 {
> + opp-hz = /bits/ 64 <888000000>;
> + opp-microvolt = <940000>;
> + opp-supported-hw = <0x1>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-1080000000-0 {
> + opp-hz = /bits/ 64 <1080000000>;
> + opp-microvolt = <1060000>;
> + opp-supported-hw = <0x1>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-1320000000-0 {
> + opp-hz = /bits/ 64 <1320000000>;
> + opp-microvolt = <1160000>;
> + opp-supported-hw = <0x1>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-1488000000-0 {
> + opp-hz = /bits/ 64 <1488000000>;
> + opp-microvolt = <1160000>;
> + opp-supported-hw = <0x1>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> +
> + opp-480000000-1 {
> + opp-hz = /bits/ 64 <480000000>;
> + opp-microvolt = <820000>;
> + opp-supported-hw = <0x2>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-720000000-1 {
> + opp-hz = /bits/ 64 <720000000>;
> + opp-microvolt = <820000>;
> + opp-supported-hw = <0x2>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-816000000-1 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <820000>;
> + opp-supported-hw = <0x2>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-888000000-1 {
> + opp-hz = /bits/ 64 <888000000>;
> + opp-microvolt = <820000>;
> + opp-supported-hw = <0x2>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-1080000000-1 {
> + opp-hz = /bits/ 64 <1080000000>;
> + opp-microvolt = <880000>;
> + opp-supported-hw = <0x2>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-1320000000-1 {
> + opp-hz = /bits/ 64 <1320000000>;
> + opp-microvolt = <940000>;
> + opp-supported-hw = <0x2>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-1488000000-1 {
> + opp-hz = /bits/ 64 <1488000000>;
> + opp-microvolt = <1000000>;
> + opp-supported-hw = <0x2>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> +
> + opp-480000000-2 {
> + opp-hz = /bits/ 64 <480000000>;
> + opp-microvolt = <800000>;
> + opp-supported-hw = <0x4>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-720000000-2 {
> + opp-hz = /bits/ 64 <720000000>;
> + opp-microvolt = <800000>;
> + opp-supported-hw = <0x4>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-816000000-2 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <800000>;
> + opp-supported-hw = <0x4>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-888000000-2 {
> + opp-hz = /bits/ 64 <888000000>;
> + opp-microvolt = <800000>;
> + opp-supported-hw = <0x4>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-1080000000-2 {
> + opp-hz = /bits/ 64 <1080000000>;
> + opp-microvolt = <840000>;
> + opp-supported-hw = <0x4>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-1320000000-2 {
> + opp-hz = /bits/ 64 <1320000000>;
> + opp-microvolt = <900000>;
> + opp-supported-hw = <0x4>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + opp-1488000000-2 {
> + opp-hz = /bits/ 64 <1488000000>;
> + opp-microvolt = <960000>;
> + opp-supported-hw = <0x4>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + };

Well, this is pure duplication of all the OPPs which isn't great. If I have
understood things correctly from the above example, then all you want is a
different microvolt value for each OPP, right ?

Then you are using the wrong feature of OPP core I am afraid. What you should
rather look for is opp-microvolt-<name> property, look in opp.txt bindings.

And these are the helper you need to use:
dev_pm_opp_set_prop_name()/dev_pm_opp_put_prop_name().

--
viresh

\
 
 \ /
  Last update: 2019-04-09 12:07    [W:0.130 / U:29.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site