[lkml]   [2019]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[RFC PATCH v3 0/4] x86: Add the support of ACRN guest under arch/x86
ACRN is a flexible, lightweight reference hypervisor, built with real-time
and safety-criticality in mind, optimized to streamline embedded development
through an open source platform. It is built for embedded IOT with small
footprint and real-time features. More details can be found

This is the patch set that allows the Linux to work on ACRN hypervisor and it can
work with the following patch set to manage the Linux guest on acrn-hypervisor. It
includes the detection of acrn_hypervisor, upcall notification vector from
hypervisor, hypercall. The hypervisor detection is similar to Xen/VMWARE/Hyperv.
ACRN also uses the upcall notification mechanism similar to that in Xen/Microsoft
HyperV when it needs to send the notification to Linux OS. The hypercall provides
the mechanism that can be used to query/configure the acrn-hypervisor by Linux guest.

Following this patch set, we will send acrn driver part, which provides the interface
that can be used to manage the virtualized CPU/memory/device/interrupt for other guest
OS after the acrn hypervisor is detected.

v1->v2: Change the CONFIG_ACRN to CONFIG_ACRN_GUEST, which makes it easy to
Remove the export of x86_hyper_acrn.
Remove the unused API definition of acrn_setup_intr_handler and
Adjust the order of header file
Add the declaration of acrn_hv_vector_handler and tracing
definition of acrn_hv_callback_vector.
Refine the comments for the function of acrn_hypercall0/1/2

v2-v3: Add one new config symbol to unify the conditional definition
of hv_irq_callback_count
Use the "vmcall" mnemonic to replace the hard-code byte definition
Remove the unnecessary dependency of CONFIG_PARAVIRT for ACRN_GUEST

Zhao Yakui (4):
x86: Add new config symbol to unify conditional definition of
x86: Add the support of ACRN guest
x86: Use HYPERVISOR_CALLBACK_VECTOR for acrn_guest upcall vector
x86: Add hypercall for acrn_guest

arch/x86/Kconfig | 12 +++++
arch/x86/entry/entry_64.S | 5 +++
arch/x86/include/asm/acrn_hypercall.h | 82 +++++++++++++++++++++++++++++++++++
arch/x86/include/asm/acrnhyper.h | 19 ++++++++
arch/x86/include/asm/hardirq.h | 2 +-
arch/x86/include/asm/hypervisor.h | 1 +
arch/x86/kernel/cpu/Makefile | 1 +
arch/x86/kernel/cpu/acrn.c | 57 ++++++++++++++++++++++++
arch/x86/kernel/cpu/hypervisor.c | 4 ++
arch/x86/kernel/irq.c | 2 +-
arch/x86/xen/Kconfig | 1 +
drivers/hv/Kconfig | 1 +
12 files changed, 185 insertions(+), 2 deletions(-)
create mode 100644 arch/x86/include/asm/acrn_hypercall.h
create mode 100644 arch/x86/include/asm/acrnhyper.h
create mode 100644 arch/x86/kernel/cpu/acrn.c


 \ /
  Last update: 2019-04-08 10:15    [W:0.141 / U:4.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site