lkml.org 
[lkml]   [2019]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V8 4/5] drm/mediatek: no change parent rate in round_rate() for mt2701 hdmi phy
From
Date
Hi, Wangyan:

On Tue, 2019-04-02 at 17:36 +0800, wangyan wang wrote:
> From: Wangyan Wang <wangyan.wang@mediatek.com>
>
> This is the third step to make MT2701 HDMI stable.
> We should not change the rate of parent for hdmi phy when
> doing round_rate for this clock. The parent clock of hdmi
> phy must be the same as it. We change it when doing set_rate
> only.
>
> Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_hdmi_phy.c | 14 --------------
> drivers/gpu/drm/mediatek/mtk_hdmi_phy.h | 2 --
> drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 6 ++++++
> drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 14 ++++++++++++++
> 4 files changed, 20 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> index 13bbaf997819..fe05aa762107 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> @@ -15,20 +15,6 @@ static const struct phy_ops mtk_hdmi_phy_dev_ops = {
> .owner = THIS_MODULE,
> };
>
> -long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> - unsigned long *parent_rate)
> -{
> - struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> -
> - hdmi_phy->pll_rate = rate;
> - if (rate <= 74250000)
> - *parent_rate = rate;
> - else
> - *parent_rate = rate / 2;
> -
> - return rate;
> -}
> -
> unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> index 0045824c1be9..86895be0d192 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> @@ -49,8 +49,6 @@ void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
> void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
> u32 val, u32 mask);
> struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
> -long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> - unsigned long *parent_rate);
> unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate);
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> index 844e622f052c..5f8c2b044034 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> @@ -154,6 +154,12 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> return 0;
> }
>
> +static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *parent_rate)

Align the first character to the right of '('.

> +{
> + return rate;

You do not assign hdmi_phy->pll_rate here because you depend on the
patch 'drm/mediatek: make implementation of recalc_rate() to match the
definition', so you should move that patch before this patch.

> +}
> +
> static const struct clk_ops mtk_hdmi_phy_pll_ops = {
> .prepare = mtk_hdmi_pll_prepare,
> .unprepare = mtk_hdmi_pll_unprepare,
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
> index f44066875dcd..472d2fda0a03 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
> @@ -285,6 +285,20 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> return 0;
> }
>
> +static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *parent_rate)

Align the first character to the right of '('.

Regards,
CK

> +{
> + struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> + hdmi_phy->pll_rate = rate;
> + if (rate <= 74250000)
> + *parent_rate = rate;
> + else
> + *parent_rate = rate / 2;
> +
> + return rate;
> +}
> +
> static const struct clk_ops mtk_hdmi_phy_pll_ops = {
> .prepare = mtk_hdmi_pll_prepare,
> .unprepare = mtk_hdmi_pll_unprepare,


\
 
 \ /
  Last update: 2019-04-08 05:57    [W:0.095 / U:10.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site