lkml.org 
[lkml]   [2019]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ACPI / LPSS: Don't skip late system PM ops for hibernate on BYT/CHT
From
Date
at 4:58 AM, Robert R. Howell <RHowell@uwyo.edu> wrote:

> On 4/3/19 2:54 AM, Hans de Goede wrote:
>
>> Hi,
>>
>> On 03-04-19 07:43, Kai-Heng Feng wrote:
>>> i2c-designware-platdrv fails to work after the system restored from
>>> hibernation:
>>> [ 272.775692] i2c_designware 80860F41:00: Unknown Synopsys component
>>> type: 0xffffffff
>>>
>>> Commit 48402cee6889 ("ACPI / LPSS: Resume BYT/CHT I2C controllers from
>>> resume_noirq") makes acpi_lpss_{suspend_late,resume_early}() bail early
>>> on BYT/CHT as resume_from_noirq is set. This means dw_i2c_plat_resume()
>>> doesn't gets called by acpi_lpss_resume_early(), and this causes the
>>> issue.
> ...
>> The ordering problem fixed by commit 48402cee6889 can hit hibernate too,
>> so I think it would be better to do this instead to fix this problem:
>>
>> diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
>> index 1e2a10a06b9d..cf768608437e 100644
> ...
>> If people affected by the problem can give my version of the fix a test,
>> then that would be great.
>>
>> Regards,
>>
>> Hans
>
> I did try applying your (Hans') patch to a 5.0.0 and a 5.1-rc3 kernel,
> instead of what I had
> been doing previously, which was reverting commit 02e45646d53b. I tested
> it on an ASUS T100TA
> and unfortunately with both kernels after resume from hibernation I still
> get errors like those
> listed below, and sound no longer works. I also tried applying the patch
> from Kai-Heng Feng
> (instead of Hans' patch or my revert) on both kernels and again in both
> cases I get these same errors.

Hmm, Hans’ works for me, as acpi_lpss_resume_noirq() calls
acpi_lpss_do_resume_early() for S4.

>
> In contrast, on the 5.0.0 kernel when I revert 02e45646d53b, the problem
> is fixed. Because
> of changes in adjacent code in 5.1-rc3, I haven't yet found a way to
> merge the new code
> and the 02e45646d53b revert without causing worse problems. But that's
> probably because
> I don't really understand the details of that code.
>
> [ 120.690428] i2c_designware 80860F41:01: timeout waiting for bus ready
> [ 120.690442] rt5640 i2c-10EC5640:00: Failed to write 13d = 3600: -110
> [ 120.712860] i2c_designware 80860F41:01: timeout waiting for bus ready
> [ 120.737389] i2c_designware 80860F41:01: timeout waiting for bus ready
> [ 120.759657] i2c_designware 80860F41:01: timeout waiting for bus ready
> [ 120.781797] i2c_designware 80860F41:01: timeout waiting for bus ready
> [ 120.804153] i2c_designware 80860F41:01: timeout waiting for bus ready
> [ 120.826467] i2c_designware 80860F41:01: timeout waiting for bus ready
> [ 121.965886] i2c_designware 80860F41:01: timeout in disabling adapter
> .....
> [ 132.782634] i2c_designware 80860F41:01: controller timed out
> [ 133.806538] i2c_designware 80860F41:01: controller timed out
> [ 134.830991] i2c_designware 80860F41:01: controller timed out
> [ 135.855183] i2c_designware 80860F41:01: controller timed out
>
> Let me know if I can do any other testing to help.

Is it possible to attach full dmesg? Thanks.

Kai-Heng

>
> Bob Howell


\
 
 \ /
  Last update: 2019-04-08 05:44    [W:0.117 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site