lkml.org 
[lkml]   [2019]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: sun8i: h3: bluetooth for Banana Pi M2 Zero board
ping

On Fri, 1 Mar 2019 19:52:12 +0100
Andreas Kemnade <andreas@kemnade.info> wrote:

> The Banana Pi M2 Zero board has an AP6212 BT+Wifi combo chip
> with broadcom internals attached to UART1 and some gpios.
> This addition is in line with similar boards
>
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
> changes in v2: remove pinctrl things
> arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> index 1db2541135a7..57432d0500b1 100644
> --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> @@ -69,6 +69,8 @@
> compatible = "mmc-pwrseq-simple";
> pinctrl-names = "default";
> reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
> + clocks = <&rtc 1>;
> + clock-names = "ext_clock";
> };
> };
>
> @@ -122,7 +124,20 @@
> &uart1 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
> + uart-has-rtscts;
> status = "okay";
> +
> + bluetooth {
> + compatible = "brcm,bcm43438-bt";
> + clocks = <&rtc 1>;
> + clock-names = "lpo";
> + vbat-supply = <&reg_vcc3v3>;
> + vddio-supply = <&reg_vcc3v3>;
> + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
> + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
> + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
> + };
> +
> };
>
> &usb_otg {
> --
> 2.11.0
>
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-04-07 22:24    [W:0.079 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site