[lkml]   [2019]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v3] drm/bridge: sil_sii8620: make remote control optional.
commit d6abe6df706c (drm/bridge: sil_sii8620: do not have a dependency
of RC_CORE) changed the driver to select both RC_CORE and INPUT.
However, this causes problems with other drivers, in particular an input
driver that depends on MFD_INTEL_LPSS_PCI (to be added in a separate

drivers/clk/Kconfig:9:error: recursive dependency detected!
drivers/clk/Kconfig:9: symbol COMMON_CLK is selected by MFD_INTEL_LPSS
drivers/mfd/Kconfig:566: symbol MFD_INTEL_LPSS is selected by MFD_INTEL_LPSS_PCI
drivers/mfd/Kconfig:580: symbol MFD_INTEL_LPSS_PCI is implied by KEYBOARD_APPLESPI
drivers/input/keyboard/Kconfig:73: symbol KEYBOARD_APPLESPI depends on INPUT
drivers/input/Kconfig:8: symbol INPUT is selected by DRM_SIL_SII8620
drivers/gpu/drm/bridge/Kconfig:83: symbol DRM_SIL_SII8620 depends on DRM_BRIDGE
drivers/gpu/drm/bridge/Kconfig:1: symbol DRM_BRIDGE is selected by DRM_PL111
drivers/gpu/drm/pl111/Kconfig:1: symbol DRM_PL111 depends on COMMON_CLK

According to the docs and general consensus, select should only be used
for non user-visible symbols, but both RC_CORE and INPUT are
user-visible. Furthermore almost all other references to INPUT
throughout the kernel config are depends, not selects. For this reason
the first part of this change reverts commit d6abe6df706c.

In order to address the original reason for commit d6abe6df706c, namely
that not all boards use the remote controller functionality and hence
should not need have to deal with RC_CORE, the second part of this
change now makes the remote control support in the driver optional and
contingent on RC_CORE being defined. And with this the hard dependency
on INPUT also goes away as that is only needed if RC_CORE is defined
(which in turn already depends on INPUT).

CC: Inki Dae <>
CC: Andrzej Hajda <>
CC: Laurent Pinchart <>
CC: Dmitry Torokhov <>
Signed-off-by: Ronald Tschalär <>
Changes in v3, from review by Andrzej Hajda:
- imply RC_CORE in Kconfig to avoid the possibility of sii8620 being
built-in but rc-core being a module
- completely stub out sii8620_detach() to make it consistent with the
approach taken for the other rc-related functions

drivers/gpu/drm/bridge/Kconfig | 3 +--
drivers/gpu/drm/bridge/sil-sii8620.c | 21 +++++++++++++++++++++
2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 8840f396a7b6..298189067929 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -86,8 +86,7 @@ config DRM_SIL_SII8620
depends on OF
imply EXTCON
- select INPUT
- select RC_CORE
+ imply RC_CORE
Silicon Image SII8620 HDMI/MHL bridge chip driver.

diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
index 0cc293a6ac24..9cac00579414 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -66,7 +66,9 @@ enum sii8620_mt_state {
struct sii8620 {
struct drm_bridge bridge;
struct device *dev;
struct rc_dev *rc_dev;
struct clk *clk_xtal;
struct gpio_desc *gpio_reset;
struct gpio_desc *gpio_int;
@@ -1756,6 +1758,7 @@ static void sii8620_send_features(struct sii8620 *ctx)
sii8620_write_buf(ctx, REG_MDT_XMIT_WRITE_PORT, buf, ARRAY_SIZE(buf));

static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
bool pressed = !(scancode & MHL_RCP_KEY_RELEASED_MASK);
@@ -1774,6 +1777,12 @@ static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)

return true;
+static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
+ return false;

static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
@@ -2097,6 +2106,7 @@ static void sii8620_cable_in(struct sii8620 *ctx)

static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
struct rc_dev *rc_dev;
@@ -2126,6 +2136,11 @@ static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
ctx->rc_dev = rc_dev;
+static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)

static void sii8620_cable_out(struct sii8620 *ctx)
@@ -2212,12 +2227,18 @@ static int sii8620_attach(struct drm_bridge *bridge)
return sii8620_clear_error(ctx);

static void sii8620_detach(struct drm_bridge *bridge)
struct sii8620 *ctx = bridge_to_sii8620(bridge);

+static void sii8620_detach(struct drm_bridge *bridge)

static int sii8620_is_packing_required(struct sii8620 *ctx,
const struct drm_display_mode *mode)
 \ /
  Last update: 2019-04-07 03:31    [W:0.141 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site