lkml.org 
[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] dt-bindings: thermal: al-thermal: Add binding documentation
Date
Add thermal binding documentation for Amazon's Annapurna Labs Thermal
Sensor.

Signed-off-by: Talel Shenhar <talel@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
---
.../bindings/thermal/amazon,al-thermal.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
new file mode 100644
index 0000000..af8cf18
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
@@ -0,0 +1,33 @@
+Amazon's Annapurna Labs Thermal Sensor
+
+Simple thermal device that allows temperature reading by a single MMIO
+transaction.
+
+Required properties:
+- compatible: "amazon,al-thermal".
+- reg: The physical base address and length of the sensor's registers.
+- #thermal-sensor-cells: Must be 1. See ./thermal.txt for a description.
+
+Example:
+ thermal: thermal {
+ compatible = "amazon,al-thermal";
+ reg = <0x0 0x05002860 0x0 0x1>;
+ #thermal-sensor-cells = <0x1>;
+ };
+
+ thermal-zones {
+ thermal_z0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&thermal 0>;
+ trips {
+ thermalz0_crit {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ };
+ };
+
--
2.7.4
\
 
 \ /
  Last update: 2019-04-04 12:19    [W:0.039 / U:57.636 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site