lkml.org 
[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] Amazon's Annapurna Labs Thermal Sensor Driver
Date
This series introduces support for Amazon's Annapurna Labs Thermal Sensor
based on a new simple MMIO thermal driver. This driver is intended to be
used by other devices as well, which require just a simple MMIO access to
read temperature.

Changes since v1:
==================
- removed the "thermal_mmio" compatible string. With v2 version, only
specific hardware can bound
- add initialization function that is mapped based on the specific binding
string
- removed thermal_mmio_readl and thermal_readw, but kept mmio reads in
callback function. Left only thermal_mmio_reab which is used by
al-thermal
- removed divider, bias, width which are not needed for al-thermal.



Talel Shenhar (2):
dt-bindings: thermal: al-thermal: Add binding documentation
thermal: Introduce Amazon's Annapurna Labs Thermal Driver

.../bindings/thermal/amazon,al-thermal.txt | 33 ++++++
MAINTAINERS | 6 +
drivers/thermal/Kconfig | 10 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/thermal_mmio.c | 129 +++++++++++++++++++++
5 files changed, 179 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt
create mode 100644 drivers/thermal/thermal_mmio.c

--
2.7.4

\
 
 \ /
  Last update: 2019-04-04 12:19    [W:0.055 / U:5.124 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site