lkml.org 
[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] dt-bindings: usb: Add usb-phy property to the jz4740-musb node
Date
Add a required 'usb-phy' property, to obtain a phandle to the USB PHY
from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---

Notes:
v2: Change "usb-phy" DT property to "phys"

Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
index 620355cee63f..16808721f3ff 100644
--- a/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
+++ b/Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
@@ -8,9 +8,15 @@ Required properties:
- interrupt-names: must be "mc"
- clocks: phandle to the "udc" clock
- clock-names: must be "udc"
+- phys: phandle to the USB PHY

Example:

+usb_phy: usb-phy@0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+};
+
udc: usb@13040000 {
compatible = "ingenic,jz4740-musb";
reg = <0x13040000 0x10000>;
@@ -21,4 +27,6 @@ udc: usb@13040000 {

clocks = <&cgu JZ4740_CLK_UDC>;
clock-names = "udc";
+
+ phys = <&usb_phy>;
};
--
2.11.0
\
 
 \ /
  Last update: 2019-04-04 11:48    [W:0.044 / U:1.420 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site