[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[RFC PATCH 6/9] dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
Add qcom-opp bindings with properties needed for Core Power Reduction (CPR).

CPR is included in a great variety of Qualcomm SoC, e.g. msm8916 and msm8996,
and was first introduced in msm8974.

Co-developed-by: Jorge Ramirez-Ortiz <>
Signed-off-by: Jorge Ramirez-Ortiz <>
Signed-off-by: Niklas Cassel <>
.../devicetree/bindings/opp/qcom-opp.txt | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt

diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt
new file mode 100644
index 000000000000..d24280467db7
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt
@@ -0,0 +1,24 @@
+Qualcomm OPP bindings to describe OPP nodes
+The bindings are based on top of the operating-points-v2 bindings
+described in Documentation/devicetree/bindings/opp/opp.txt
+Additional properties are described below.
+* OPP Table Node
+Required properties:
+- compatible: Allow OPPs to express their compatibility. It should be:
+ "operating-points-v2-qcom-level"
+* OPP Node
+Optional properties:
+- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. Even
+ though a power domain doesn't need a opp-hz, there can be devices in the
+ power domain that need to know the highest supported frequency for each
+ corner/level (e.g. CPR), in order to properly initialize the hardware.
+- qcom,opp-fuse-level: A positive value representing the fuse corner/level
+ associated with this OPP node. Sometimes several corners/levels shares
+ a certain fuse corner/level. A fuse corner/level contains e.g. ref uV,
+ min uV, and max uV.
 \ /
  Last update: 2019-04-04 07:13    [W:0.168 / U:4.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site