lkml.org 
[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 02/25] dt-bindings: leds: Add LED_FUNCTION definitions
From
Date
On 3/31/19 12:54 PM, Jacek Anaszewski wrote:
> Add initial set of common LED function definitions for use in Device Tree.
>
> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Cc: Baolin Wang <baolin.wang@linaro.org>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Dan Murphy <dmurphy@ti.com>
> Cc: Daniel Mack <daniel@zonque.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleh Kravchenko <oleg@kaa.org.ua>
> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
> Cc: Simon Shields <simon@lineageos.org>
> ---
> include/dt-bindings/leds/common.h | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
> index e171d0a6beb2..0325db5b4208 100644
> --- a/include/dt-bindings/leds/common.h
> +++ b/include/dt-bindings/leds/common.h
> @@ -19,4 +19,40 @@
> #define LEDS_BOOST_ADAPTIVE 1
> #define LEDS_BOOST_FIXED 2
>
> +/* Standard LED functions */
> +#define LED_FUNCTION_ACTIVITY "activity"
> +#define LED_FUNCTION_ALARM "alarm"
> +#define LED_FUNCTION_BACKLIGHT "backlight"
> +#define LED_FUNCTION_BLUETOOTH "bluetooth"
> +#define LED_FUNCTION_BOOT "boot"
> +#define LED_FUNCTION_CHARGE "charge"
> +#define LED_FUNCTION_DEBUG "debug"
> +#define LED_FUNCTION_DISK "disk"
> +#define LED_FUNCTION_DISK_ERR "disk-err"
> +#define LED_FUNCTION_DISK_READ "disk-read"
> +#define LED_FUNCTION_DISK_WRITE "disk-write"
> +#define LED_FUNCTION_FAULT "fault"
> +#define LED_FUNCTION_FLASH "flash"
> +#define LED_FUNCTION_HEARTBEAT "heartbeat"
> +#define LED_FUNCTION_INDICATOR "indicator"
> +#define LED_FUNCTION_KEYBOARD "keyboard"
> +#define LED_FUNCTION_KEYPAD "keypad"
> +#define LED_FUNCTION_LAN "lan"
> +#define LED_FUNCTION_MMC "mmc"
> +#define LED_FUNCTION_NAND "nand"
> +#define LED_FUNCTION_ON "on"
> +#define LED_FUNCTION_PROGRAMMING "programming"
> +#define LED_FUNCTION_POWER "power"
> +#define LED_FUNCTION_RX "rx"
> +#define LED_FUNCTION_SD "sd"
> +#define LED_FUNCTION_STANDBY "standby"
> +#define LED_FUNCTION_STATUS "status"
> +#define LED_FUNCTION_TORCH "torch"
> +#define LED_FUNCTION_TV "tv"
> +#define LED_FUNCTION_TX "tx"
> +#define LED_FUNCTION_USB "usb"
> +#define LED_FUNCTION_WAN "wan"
> +#define LED_FUNCTION_WLAN "wlan"
> +#define LED_FUNCTION_WPS "wps"
> +
> #endif /* __DT_BINDINGS_LEDS_H */
>

Reviewed-by: Dan Murphy <dmurphy@ti.com>

--
------------------
Dan Murphy

\
 
 \ /
  Last update: 2019-04-05 03:12    [W:0.215 / U:1.564 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site