lkml.org 
[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 17/20] spi: add a method for configuring CS timing
Date
This patch creates set_cs_timing SPI master optional method for
SPI masters to implement configuring CS timing if applicable.

This patch also creates spi_cs_timing accessory for SPI clients to
use for requesting SPI master controllers to configure device requested
CS setup time, hold time and inactive delay.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
drivers/spi/spi.c | 15 +++++++++++++++
include/linux/spi/spi.h | 15 +++++++++++++++
2 files changed, 30 insertions(+)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 97ce047a776b..0f92329e990f 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2995,6 +2995,21 @@ int spi_setup(struct spi_device *spi)
}
EXPORT_SYMBOL_GPL(spi_setup);

+/**
+ * spi_set_cs_timing - configure CS setup, hold, and inactive delays
+ * @spi: the device that requires specific CS timing configuration
+ * @setup: CS setup time in terms of clock count
+ * @hold: CS hold time in terms of clock count
+ * @inactive_dly: CS inactive delay between transfers in terms of clock count
+ */
+void spi_set_cs_timing(struct spi_device *spi, u8 setup, u8 hold,
+ u8 inactive_dly)
+{
+ if (spi->controller->set_cs_timing)
+ spi->controller->set_cs_timing(spi, setup, hold, inactive_dly);
+}
+EXPORT_SYMBOL_GPL(spi_set_cs_timing);
+
static int __spi_validate(struct spi_device *spi, struct spi_message *message)
{
struct spi_controller *ctlr = spi->controller;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index d5c86b763f43..fc4d21b4c2e4 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -331,6 +331,9 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* must fail if an unrecognized or unsupported mode is requested.
* It's always safe to call this unless transfers are pending on
* the device whose settings are being modified.
+ * @set_cs_timing: optional hook for SPI devices to request SPI master
+ * controller for configuring specific CS setup time, hold time and inactive
+ * delay interms of clock counts
* @transfer: adds a message to the controller's transfer queue.
* @cleanup: frees controller-specific state
* @can_dma: determine whether this controller supports DMA
@@ -364,6 +367,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* @unprepare_transfer_hardware: there are currently no more messages on the
* queue so the subsystem notifies the driver that it may relax the
* hardware by issuing this call
+ *
* @set_cs: set the logic level of the chip select line. May be called
* from interrupt context.
* @prepare_message: set up the controller to transfer a single message,
@@ -489,6 +493,17 @@ struct spi_controller {
*/
int (*setup)(struct spi_device *spi);

+ /*
+ * set_cs_timing() method is for SPI controllers that supports
+ * configuring CS timing.
+ *
+ * This hook allows SPI client drivers to request SPI controllers
+ * to configure specific CS timing through spi_set_cs_timing() after
+ * spi_setup().
+ */
+ void (*set_cs_timing)(struct spi_device *spi, u8 setup_clk_cycles,
+ u8 hold_clk_cycles, u8 inactive_clk_cycles);
+
/* bidirectional bulk transfers
*
* + The transfer() method may not sleep; its main role is
--
2.7.4
\
 
 \ /
  Last update: 2019-04-05 02:15    [W:0.160 / U:0.284 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site