[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH] extcon: arizona: Disable mic detect if running when driver is removed
Microphone detection provides the button detection features on the
Arizona CODECs as such it will be running if the jack is currently
inserted. If the driver is unbound whilst the jack is still inserted
this will cause warnings from the regulator framework as the MICVDD
regulator is put but was never disabled.

Correct this by disabling microphone detection on driver removal and if
the microphone detection was running disable the regulator and put the
runtime reference that was currently held.

Signed-off-by: Charles Keepax <>
drivers/extcon/extcon-arizona.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index da0e9bc4262fa..9327479c719c2 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -1726,6 +1726,16 @@ static int arizona_extcon_remove(struct platform_device *pdev)
struct arizona_extcon_info *info = platform_get_drvdata(pdev);
struct arizona *arizona = info->arizona;
int jack_irq_rise, jack_irq_fall;
+ bool change;
+ regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+ &change);
+ if (change) {
+ regulator_disable(info->micvdd);
+ pm_runtime_put(info->dev);
+ }


 \ /
  Last update: 2019-04-04 18:34    [W:0.275 / U:2.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site