lkml.org 
[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v3 1/4] dt-bindings: net: phy: add g12a mdio mux documentation
Date
Add documentation for the device tree bindings of the MDIO mux of Amlogic
g12a SoC family

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../bindings/net/mdio-mux-meson-g12a.txt | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt

diff --git a/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt b/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt
new file mode 100644
index 000000000000..3a96cbed9294
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt
@@ -0,0 +1,48 @@
+Properties for the MDIO bus multiplexer/glue of Amlogic G12a SoC family.
+
+This is a special case of a MDIO bus multiplexer. It allows to choose between
+the internal mdio bus leading to the embedded 10/100 PHY or the external
+MDIO bus.
+
+Required properties in addition to the generic multiplexer properties:
+- compatible : amlogic,g12a-mdio-mux
+- reg: physical address and length of the multiplexer/glue registers
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+ * "pclk" : peripheral clock.
+ * "clkin0" : platform crytal
+ * "clkin1" : SoC 50MHz MPLL
+
+Example :
+
+mdio_mux: mdio-multiplexer@4c000 {
+ compatible = "amlogic,g12a-mdio-mux";
+ reg = <0x0 0x4c000 0x0 0xa4>;
+ clocks = <&clkc CLKID_ETH_PHY>,
+ <&xtal>,
+ <&clkc CLKID_MPLL_5OM>;
+ clock-names = "pclk", "clkin0", "clkin1";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_mdio: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ int_mdio: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ internal_ephy: ethernet-phy@8 {
+ compatible = "ethernet-phy-id0180.3301",
+ "ethernet-phy-ieee802.3-c22";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <8>;
+ max-speed = <100>;
+ };
+ };
+};
--
2.20.1
\
 
 \ /
  Last update: 2019-04-04 15:13    [W:0.047 / U:27.764 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site