lkml.org 
[lkml]   [2019]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/6] iommu/ipmmu-vmsa: Extract hardware context initialization
Date
ipmmu_domain_init_context() takes care of (1) initializing the software
domain, and (2) initializing the hardware context for the domain.

Extract the code to initialize the hardware context into a new subroutine
ipmmu_domain_setup_context(), to prepare for later reuse.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
- s/ipmmu_context_init/ipmmu_domain_setup_context/.
---
drivers/iommu/ipmmu-vmsa.c | 91 ++++++++++++++++++++------------------
1 file changed, 48 insertions(+), 43 deletions(-)

diff --git a/drivers/iommu/ipmmu-vmsa.c b/drivers/iommu/ipmmu-vmsa.c
index 3fa57627b1e35562..56e84bcc9532e1ce 100644
--- a/drivers/iommu/ipmmu-vmsa.c
+++ b/drivers/iommu/ipmmu-vmsa.c
@@ -404,52 +404,10 @@ static void ipmmu_domain_free_context(struct ipmmu_vmsa_device *mmu,
spin_unlock_irqrestore(&mmu->lock, flags);
}

-static int ipmmu_domain_init_context(struct ipmmu_vmsa_domain *domain)
+static void ipmmu_domain_setup_context(struct ipmmu_vmsa_domain *domain)
{
u64 ttbr;
u32 tmp;
- int ret;
-
- /*
- * Allocate the page table operations.
- *
- * VMSA states in section B3.6.3 "Control of Secure or Non-secure memory
- * access, Long-descriptor format" that the NStable bit being set in a
- * table descriptor will result in the NStable and NS bits of all child
- * entries being ignored and considered as being set. The IPMMU seems
- * not to comply with this, as it generates a secure access page fault
- * if any of the NStable and NS bits isn't set when running in
- * non-secure mode.
- */
- domain->cfg.quirks = IO_PGTABLE_QUIRK_ARM_NS;
- domain->cfg.pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K;
- domain->cfg.ias = 32;
- domain->cfg.oas = 40;
- domain->cfg.tlb = &ipmmu_gather_ops;
- domain->io_domain.geometry.aperture_end = DMA_BIT_MASK(32);
- domain->io_domain.geometry.force_aperture = true;
- /*
- * TODO: Add support for coherent walk through CCI with DVM and remove
- * cache handling. For now, delegate it to the io-pgtable code.
- */
- domain->cfg.iommu_dev = domain->mmu->root->dev;
-
- /*
- * Find an unused context.
- */
- ret = ipmmu_domain_allocate_context(domain->mmu->root, domain);
- if (ret < 0)
- return ret;
-
- domain->context_id = ret;
-
- domain->iop = alloc_io_pgtable_ops(ARM_32_LPAE_S1, &domain->cfg,
- domain);
- if (!domain->iop) {
- ipmmu_domain_free_context(domain->mmu->root,
- domain->context_id);
- return -EINVAL;
- }

/* TTBR0 */
ttbr = domain->cfg.arm_lpae_s1_cfg.ttbr[0];
@@ -495,7 +453,54 @@ static int ipmmu_domain_init_context(struct ipmmu_vmsa_domain *domain)
*/
ipmmu_ctx_write_all(domain, IMCTR,
IMCTR_INTEN | IMCTR_FLUSH | IMCTR_MMUEN);
+}
+
+static int ipmmu_domain_init_context(struct ipmmu_vmsa_domain *domain)
+{
+ int ret;
+
+ /*
+ * Allocate the page table operations.
+ *
+ * VMSA states in section B3.6.3 "Control of Secure or Non-secure memory
+ * access, Long-descriptor format" that the NStable bit being set in a
+ * table descriptor will result in the NStable and NS bits of all child
+ * entries being ignored and considered as being set. The IPMMU seems
+ * not to comply with this, as it generates a secure access page fault
+ * if any of the NStable and NS bits isn't set when running in
+ * non-secure mode.
+ */
+ domain->cfg.quirks = IO_PGTABLE_QUIRK_ARM_NS;
+ domain->cfg.pgsize_bitmap = SZ_1G | SZ_2M | SZ_4K;
+ domain->cfg.ias = 32;
+ domain->cfg.oas = 40;
+ domain->cfg.tlb = &ipmmu_gather_ops;
+ domain->io_domain.geometry.aperture_end = DMA_BIT_MASK(32);
+ domain->io_domain.geometry.force_aperture = true;
+ /*
+ * TODO: Add support for coherent walk through CCI with DVM and remove
+ * cache handling. For now, delegate it to the io-pgtable code.
+ */
+ domain->cfg.iommu_dev = domain->mmu->root->dev;
+
+ /*
+ * Find an unused context.
+ */
+ ret = ipmmu_domain_allocate_context(domain->mmu->root, domain);
+ if (ret < 0)
+ return ret;
+
+ domain->context_id = ret;
+
+ domain->iop = alloc_io_pgtable_ops(ARM_32_LPAE_S1, &domain->cfg,
+ domain);
+ if (!domain->iop) {
+ ipmmu_domain_free_context(domain->mmu->root,
+ domain->context_id);
+ return -EINVAL;
+ }

+ ipmmu_domain_setup_context(domain);
return 0;
}

--
2.17.1
\
 
 \ /
  Last update: 2019-04-03 20:22    [W:0.068 / U:2.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site