lkml.org 
[lkml]   [2019]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: musb: Force-disable pullup on shutdown
On Wed, Apr 03, 2019 at 05:31:31PM +0200, Paul Cercueil wrote:
>
>
> Le mer. 3 avril 2019 à 15:26, Bin Liu <b-liu@ti.com> a écrit :
> >On Tue, Apr 02, 2019 at 09:58:42PM +0200, Paul Cercueil wrote:
> >> Hi,
> >>
> >> Le lun. 1 avril 2019 à 20:20, Bin Liu <b-liu@ti.com> a écrit :
> >> >On Mon, Apr 01, 2019 at 07:46:22PM +0200, Paul Cercueil wrote:
> >> >>
> >> >>
> >> >> Le lun. 1 avril 2019 à 19:17, Bin Liu <b-liu@ti.com> a écrit :
> >> >> >On Thu, Mar 21, 2019 at 03:42:46PM +0100, Paul Cercueil wrote:
> >> >> >> When the musb is shutdown, for instance when the driver is
> >> >>unloaded,
> >> >> >> force-disable the pullup. Otherwise, the host will still see
> >> >> >>the gadget
> >> >> >> device even after the shutdown.
> >> >> >
> >> >> >how would this happen?
> >> >> >
> >> >> >when musb-hdrc driver is unloaded, udc core removes the bound
> >> >>gadget
> >> >> >driver which calls musb_gadget_pullup() to disable the pullup.
> >> >>
> >> >> I'm testing with the jz4740-musb driver. I don't unload the
> >> >>module (it's
> >> >> built-in) but unbind it from sysfs.
> >> >
> >> >I did unbind too.
> >> >
> >> >root@am335x-evm:/sys/bus/platform/drivers/musb-hdrc# echo
> >> >musb-hdrc.0 > unbind
> >> >
> >> >or unbind the glue driver:
> >> >
> >> >root@am335x-evm:/sys/bus/platform/drivers/musb-dsps# echo
> >> >47401400.usb > unbind
> >> >
> >> >musb_gadget_pullup() is called in both cases.
> >> >
> >> >[ 3880.597014] [<bf444ab0>] (musb_gadget_pullup [musb_hdrc]) from
> >> >[<bf402cbc>] (usb_gadget_disconnect+0x3c/0xf4 [udc_core])
> >> >[ 3880.607959] [<bf402cbc>] (usb_gadget_disconnect [udc_core])
> >> >from [<bf403b28>] (usb_gadget_remove_driver+0x4c/0x90 [udc_core])
> >> >[ 3880.619338] [<bf403b28>] (usb_gadget_remove_driver [udc_core])
> >> >from [<bf403d20>] (usb_del_gadget_udc+0x5c/0xc0 [udc_core])
> >>
> >> In my case this stops here, usb_del_gadget_udc() does not call
> >> usb_gadget_remove_driver(), that's why the pullup is never disabled.
> >>
> >> I guess that's because udc->driver is NULL; I'm testing with
> >
> >then the pullup should be disable by now.
> >
> >> CONFIG_USB_CONFIGFS,
> >> and I don't configure anything in sysfs before unbinding the driver.
> >
> >I didn't check on this, but I could imagine that
> >- when a configfs gadget is bound to the udc, .pullup() is called;
> >- when the configfs gadget is unbound from the udc, .pullup should be
> > called again to disable the pullup.
>
> An important thing that I did not mention, is that the SoC boots
> from USB,
> so the pullup is active before the musb driver loads. Since in my case a

It sounds to me that the musb driver should disable the pullup during
init. Isn't it?

> configfs gadget is never bound, then .pullup() is never called, and when
> I unbind the driver the pullup is still enabled.

Regards,
-Bin.

\
 
 \ /
  Last update: 2019-04-03 17:47    [W:0.048 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site