lkml.org 
[lkml]   [2019]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: musb: Force-disable pullup on shutdown
On Tue, Apr 02, 2019 at 09:58:42PM +0200, Paul Cercueil wrote:
> Hi,
>
> Le lun. 1 avril 2019 à 20:20, Bin Liu <b-liu@ti.com> a écrit :
> >On Mon, Apr 01, 2019 at 07:46:22PM +0200, Paul Cercueil wrote:
> >>
> >>
> >> Le lun. 1 avril 2019 à 19:17, Bin Liu <b-liu@ti.com> a écrit :
> >> >On Thu, Mar 21, 2019 at 03:42:46PM +0100, Paul Cercueil wrote:
> >> >> When the musb is shutdown, for instance when the driver is
> >>unloaded,
> >> >> force-disable the pullup. Otherwise, the host will still see
> >> >>the gadget
> >> >> device even after the shutdown.
> >> >
> >> >how would this happen?
> >> >
> >> >when musb-hdrc driver is unloaded, udc core removes the bound
> >>gadget
> >> >driver which calls musb_gadget_pullup() to disable the pullup.
> >>
> >> I'm testing with the jz4740-musb driver. I don't unload the
> >>module (it's
> >> built-in) but unbind it from sysfs.
> >
> >I did unbind too.
> >
> >root@am335x-evm:/sys/bus/platform/drivers/musb-hdrc# echo
> >musb-hdrc.0 > unbind
> >
> >or unbind the glue driver:
> >
> >root@am335x-evm:/sys/bus/platform/drivers/musb-dsps# echo
> >47401400.usb > unbind
> >
> >musb_gadget_pullup() is called in both cases.
> >
> >[ 3880.597014] [<bf444ab0>] (musb_gadget_pullup [musb_hdrc]) from
> >[<bf402cbc>] (usb_gadget_disconnect+0x3c/0xf4 [udc_core])
> >[ 3880.607959] [<bf402cbc>] (usb_gadget_disconnect [udc_core])
> >from [<bf403b28>] (usb_gadget_remove_driver+0x4c/0x90 [udc_core])
> >[ 3880.619338] [<bf403b28>] (usb_gadget_remove_driver [udc_core])
> >from [<bf403d20>] (usb_del_gadget_udc+0x5c/0xc0 [udc_core])
>
> In my case this stops here, usb_del_gadget_udc() does not call
> usb_gadget_remove_driver(), that's why the pullup is never disabled.
>
> I guess that's because udc->driver is NULL; I'm testing with

then the pullup should be disable by now.

> CONFIG_USB_CONFIGFS,
> and I don't configure anything in sysfs before unbinding the driver.

I didn't check on this, but I could imagine that
- when a configfs gadget is bound to the udc, .pullup() is called;
- when the configfs gadget is unbound from the udc, .pullup should be
called again to disable the pullup.

-Bin.

\
 
 \ /
  Last update: 2019-04-03 15:26    [W:0.094 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site