lkml.org 
[lkml]   [2019]   [Apr]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/12] spi: Don't call spi_get_gpio_descs() before device name is set
Date
Move code calling spi_get_gpio_descs() to happen after ctlr->dev's
name is set in order to have proper GPIO consumer names.

Before:

cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio:
gpio-6 ( |regulator-usb0-vbus ) out lo

gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio:
gpio-36 ( |scl ) in hi
gpio-37 ( |sda ) in hi
gpio-40 ( |(null) CS1 ) out lo
gpio-41 ( |(null) CS0 ) out lo ACTIVE LOW
gpio-42 ( |miso ) in hi
gpio-43 ( |mosi ) in lo
gpio-44 ( |sck ) out lo

After:

cat /sys/kernel/debug/gpio
gpiochip0: GPIOs 0-31, parent: platform/40049000.gpio, vf610-gpio:
gpio-6 ( |regulator-usb0-vbus ) out lo

gpiochip1: GPIOs 32-63, parent: platform/4004a000.gpio, vf610-gpio:
gpio-36 ( |scl ) in hi
gpio-37 ( |sda ) in hi
gpio-40 ( |spi0 CS1 ) out lo
gpio-41 ( |spi0 CS0 ) out lo ACTIVE LOW
gpio-42 ( |miso ) in hi
gpio-43 ( |mosi ) in lo
gpio-44 ( |sck ) out lo

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-spi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/spi/spi.c | 37 +++++++++++++++++++------------------
1 file changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index bd2a424672df..19d663435b8c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2279,24 +2279,6 @@ int spi_register_controller(struct spi_controller *ctlr)
if (status)
return status;

- if (!spi_controller_is_slave(ctlr)) {
- if (ctlr->use_gpio_descriptors) {
- status = spi_get_gpio_descs(ctlr);
- if (status)
- return status;
- /*
- * A controller using GPIO descriptors always
- * supports SPI_CS_HIGH if need be.
- */
- ctlr->mode_bits |= SPI_CS_HIGH;
- } else {
- /* Legacy code path for GPIOs from DT */
- status = of_spi_register_master(ctlr);
- if (status)
- return status;
- }
- }
-
/* even if it's just one always-selected device, there must
* be at least one chipselect
*/
@@ -2353,6 +2335,25 @@ int spi_register_controller(struct spi_controller *ctlr)
* registration fails if the bus ID is in use.
*/
dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num);
+
+ if (!spi_controller_is_slave(ctlr)) {
+ if (ctlr->use_gpio_descriptors) {
+ status = spi_get_gpio_descs(ctlr);
+ if (status)
+ return status;
+ /*
+ * A controller using GPIO descriptors always
+ * supports SPI_CS_HIGH if need be.
+ */
+ ctlr->mode_bits |= SPI_CS_HIGH;
+ } else {
+ /* Legacy code path for GPIOs from DT */
+ status = of_spi_register_master(ctlr);
+ if (status)
+ return status;
+ }
+ }
+
status = device_add(&ctlr->dev);
if (status < 0) {
/* free bus id */
--
2.20.1
\
 
 \ /
  Last update: 2019-04-03 06:03    [W:0.179 / U:7.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site