lkml.org 
[lkml]   [2019]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/4] dt-bindings: usb: dwc2: Document quirk to reset PHY upon wakeup
On Tue, Apr 16, 2019 at 02:53:48PM -0700, Douglas Anderson wrote:
> On Rockchip rk3288 there's a hardware quirk where we need to assert
> the reset signal to the PHY when we get a remote wakeup on one of the
> two ports. Document this quirk in the bindings.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> ---
>
> Changes in v2: None
>
> Documentation/devicetree/bindings/usb/dwc2.txt | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
> index 6dc3c4a34483..f70f3aee4bfc 100644
> --- a/Documentation/devicetree/bindings/usb/dwc2.txt
> +++ b/Documentation/devicetree/bindings/usb/dwc2.txt
> @@ -37,6 +37,8 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
> - g-rx-fifo-size: size of rx fifo size in gadget mode.
> - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
> - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
> +- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
> + we detect a wakeup. This is due to a hardware errata.

Synopsys or Rockchip errata?

Ideally, this should be implied by the controller or phy compatible.

Rob

\
 
 \ /
  Last update: 2019-04-30 02:55    [W:0.087 / U:2.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site