lkml.org 
[lkml]   [2019]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/12] mips: Make sure dt memory regions are valid
Date
There are situations when memory regions coming from dts may be
too big for the platform physical address space. It especially
concerns XPA-capable systems. Bootleader may determine more than 4GB
memory available and pass it to the kernel over dts memory node, while
kernel is built without XPA support. In this case the region
may either simply be truncated by add_memory_region() method
or by u64->phys_addr_t type casting. But in worst case the method
can even drop the memory region if it exceedes PHYS_ADDR_MAX size.
So lets make sure the retrieved from dts memory regions are valid,
and if some of them isn't just manually truncate it with a warning
printed out.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
arch/mips/kernel/prom.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 437a174e3ef9..28bf01961bb2 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -41,7 +41,19 @@ char *mips_get_machine_name(void)
#ifdef CONFIG_USE_OF
void __init early_init_dt_add_memory_arch(u64 base, u64 size)
{
- return add_memory_region(base, size, BOOT_MEM_RAM);
+ if (base >= PHYS_ADDR_MAX) {
+ pr_warn("Trying to add an invalid memory region, skipped\n");
+ return;
+ }
+
+ /* Truncate the passed memory region instead of type casting */
+ if (base + size - 1 >= PHYS_ADDR_MAX || base + size < base) {
+ pr_warn("Truncate memory region %llx @ %llx to size %llx\n",
+ size, base, PHYS_ADDR_MAX - base);
+ size = PHYS_ADDR_MAX - base;
+ }
+
+ add_memory_region(base, size, BOOT_MEM_RAM);
}

int __init early_init_dt_reserve_memory_arch(phys_addr_t base,
--
2.21.0
\
 
 \ /
  Last update: 2019-04-24 00:50    [W:0.116 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site