lkml.org 
[lkml]   [2019]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Regression causes a hang on boot with a Comtrol PCI card
From
Date
On 2.4.2019 17.29, Alan Stern wrote:
> On Mon, 1 Apr 2019, Bjorn Helgaas wrote:
>
>> [+cc Mathias, Greg, Alan, linux-usb]
>>
>> Beginning of thread: https://lore.kernel.org/linux-pci/CANSNSoWiKd98Dt1N2sSjP9Af8zk1NPV-=3P4VLtFs_cSQG4RUg@mail.gmail.com
>>
>> Synopsis: v5.0 hangs at boot unless the following commits are reverted:
>>
>> 1302fcf0d03e ("PCI: Configure *all* devices, not just hot-added ones")
>> 1c3c5eab1715 ("sched/core: Enable might_sleep() and smp_processor_id() checks early")
>>
>> The hang appears to be in quirk_usb_early_handoff(). With
>> "initcall_debug", we see the call but not the completion:
>>
>> On Fri, Mar 22, 2019 at 03:02:11PM -0500, Jesse Hathaway wrote:
>>>> So apparently the hang happens while we're running the "final" PCI
>>>> fixups. This happens after all the rest of PCI is initialized.
>>>>
>>>> Can you boot v5.0 vanilla with "initcall_debug"? Maybe we can narrow
>>>> it down to a specific quirk.
>>>
>>> yup, added the "initcall_debug" output to the ticket:
>>> https://bugzilla.kernel.org/show_bug.cgi?id=202927, here is the tail end
>>>
>>> [ 14.896337] NET: Registered protocol family 1
>>> [ 14.901314] initcall af_unix_init+0x0/0x4e returned 0 after 4866 usecs
>>> [ 14.908694] calling ipv6_offload_init+0x0/0x7f @ 1
>>> [ 14.914238] initcall ipv6_offload_init+0x0/0x7f returned 0 after 1 usecs
>>> [ 14.921821] calling vlan_offload_init+0x0/0x20 @ 1
>>> [ 14.927365] initcall vlan_offload_init+0x0/0x20 returned 0 after 0 usecs
>>> [ 14.934948] calling pci_apply_final_quirks+0x0/0x126 @ 1
>>> [ 14.941106] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x6a0 @ 1
>>>
>>> thanks, Jesse Hathaway
>
> Most likely the problem occurs somewhere inside
> quirk_usb_handoff_xhci(). Can Jesse add debugging statements to that
> routine in order to pin down exactly where the problem lies?
>
> Alan Stern
>

lspci log from bugzilla shows 0000:00:1a.0 is a EHCI device,
so probably woth adding debugging to quirk_usb_disable_ehci() as well

00:1a.0 USB controller: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])

-Mathias

\
 
 \ /
  Last update: 2019-04-02 16:47    [W:0.083 / U:22.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site