[lkml]   [2019]   [Apr]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH RESEND v6 2/6] dt-bindings: i2c: Add Mediatek MT8183 i2c binding
Add MT8183 i2c binding to binding file. Compare to MT2712 i2c
controller, MT8183 has different registers, offsets, and clock.

Signed-off-by: Qii Wang <>
Reviewed-by: Matthias Brugger <>
Documentation/devicetree/bindings/i2c/i2c-mtk.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
index ee4c324..b052f29 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
@@ -12,13 +12,15 @@ Required properties:
"mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
"mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
"mediatek,mt8173-i2c": for MediaTek MT8173
+ "mediatek,mt8183-i2c": for MediaTek MT8183
- reg: physical base address of the controller and dma base, length of memory
mapped region.
- interrupts: interrupt number to the cpu.
- clock-div: the fixed value for frequency divider of clock source in i2c
module. Each IC may be different.
- clocks: clock name from clock manager
- - clock-names: Must include "main" and "dma", if enable have-pmic need include
+ - clock-names: Must include "main" and "dma", "arb" is for multi-master that
+ one bus has more than two i2c controllers, if enable have-pmic need include
"pmic" extra.

Optional properties:
 \ /
  Last update: 2019-04-02 14:37    [W:0.083 / U:41.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site