lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v9 3/5] KVM: arm64: Add userspace flag to enable pointer authentication
On Fri, Apr 12, 2019 at 08:50:34AM +0530, Amit Daniel Kachhap wrote:
> Now that the building blocks of pointer authentication are present, lets
> add userspace flags KVM_ARM_VCPU_PTRAUTH_ADDRESS and
> KVM_ARM_VCPU_PTRAUTH_GENERIC. These flags will enable pointer
> authentication for the KVM guest on a per-vcpu basis through the ioctl
> KVM_ARM_VCPU_INIT.
>
> This features will allow the KVM guest to allow the handling of
> pointer authentication instructions or to treat them as undefined
> if not set.
>
> Necessary documentations are added to reflect the changes done.
>
> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Christoffer Dall <christoffer.dall@arm.com>
> Cc: kvmarm@lists.cs.columbia.edu
> ---
>
> Changes since v8:
> * Update vcpu->arch.flags to final enable state. [Dave Martin]
> * Change in Documentation to make clear the implementation of 2 vcpu
> feature flags. [Dave Martin]
>
> Documentation/arm64/pointer-authentication.txt | 22 ++++++++++++++++++----
> Documentation/virtual/kvm/api.txt | 6 ++++++
> arch/arm64/include/asm/kvm_host.h | 2 +-
> arch/arm64/include/uapi/asm/kvm.h | 2 ++
> arch/arm64/kvm/reset.c | 24 ++++++++++++++++++++++++
> 5 files changed, 51 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/arm64/pointer-authentication.txt b/Documentation/arm64/pointer-authentication.txt
> index 5baca42..fc71b33 100644
> --- a/Documentation/arm64/pointer-authentication.txt
> +++ b/Documentation/arm64/pointer-authentication.txt
> @@ -87,7 +87,21 @@ used to get and set the keys for a thread.
> Virtualization
> --------------
>
> -Pointer authentication is not currently supported in KVM guests. KVM
> -will mask the feature bits from ID_AA64ISAR1_EL1, and attempted use of
> -the feature will result in an UNDEFINED exception being injected into
> -the guest.
> +Pointer authentication is enabled in KVM guest when each virtual cpu is
> +initialised by passing flags KVM_ARM_VCPU_PTRAUTH_[ADDRESS/GENERIC] and
> +requesting these two separate cpu features to be enabled. The current KVM
> +guest implementation works by enabling both features together, so both
> +these userspace flags are checked before enabling pointer authentication.
> +The separate userspace flag will allow to have no userspace ABI changes
> +if support is added in the future to allow these two features to be
> +enabled independently of one another.
> +
> +As Arm Architecture specifies that Pointer Authentication feature is
> +implemented along with the VHE feature so KVM arm64 ptrauth code relies
> +on VHE mode to be present.
> +
> +Additionally, when these vcpu feature flags are not set then KVM will
> +filter out the Pointer Authentication system key registers from
> +KVM_GET/SET_REG_* ioctls and mask those features from cpufeature ID
> +register. Any attempt to use the Pointer Authentication instructions will
> +result in an UNDEFINED exception being injected into the guest.
> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> index 68509de..9d202f4 100644
> --- a/Documentation/virtual/kvm/api.txt
> +++ b/Documentation/virtual/kvm/api.txt
> @@ -2753,6 +2753,12 @@ Possible features:
> Depends on KVM_CAP_ARM_PSCI_0_2.
> - KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU.
> Depends on KVM_CAP_ARM_PMU_V3.
> + - KVM_ARM_VCPU_PTRAUTH_ADDRESS: Enables Address Pointer authentication
> + for the CPU and supported only on arm64 architecture.

Nit: (arm64 only) would be less verbose.

> + Must be requested if KVM_ARM_VCPU_PTRAUTH_GENERIC is also requested.
> + - KVM_ARM_VCPU_PTRAUTH_GENERIC: Enables Generic Pointer authentication
> + for the CPU and supported only on arm64 architecture.

Ditto. (Not a big deal, though.)

> + Must be requested if KVM_ARM_VCPU_PTRAUTH_ADDRESS is also requested.
>
> - KVM_ARM_VCPU_SVE: Enables SVE for the CPU (arm64 only).
> Depends on KVM_CAP_ARM_SVE.
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index a585d82..25f2598 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -49,7 +49,7 @@
>
> #define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
>
> -#define KVM_VCPU_MAX_FEATURES 5
> +#define KVM_VCPU_MAX_FEATURES 7
>
> #define KVM_REQ_SLEEP \
> KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
> diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
> index 6963b7e..fec2253 100644
> --- a/arch/arm64/include/uapi/asm/kvm.h
> +++ b/arch/arm64/include/uapi/asm/kvm.h
> @@ -103,6 +103,8 @@ struct kvm_regs {
> #define KVM_ARM_VCPU_PSCI_0_2 2 /* CPU uses PSCI v0.2 */
> #define KVM_ARM_VCPU_PMU_V3 3 /* Support guest PMUv3 */
> #define KVM_ARM_VCPU_SVE 4 /* enable SVE for this CPU */
> +#define KVM_ARM_VCPU_PTRAUTH_ADDRESS 5 /* VCPU uses address authentication */
> +#define KVM_ARM_VCPU_PTRAUTH_GENERIC 6 /* VCPU uses generic authentication */
>
> struct kvm_vcpu_init {
> __u32 target;
> diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
> index f13378d..d13406b 100644
> --- a/arch/arm64/kvm/reset.c
> +++ b/arch/arm64/kvm/reset.c
> @@ -221,6 +221,24 @@ static void kvm_vcpu_reset_sve(struct kvm_vcpu *vcpu)
> memset(vcpu->arch.sve_state, 0, vcpu_sve_state_size(vcpu));
> }
>
> +static int kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu)
> +{
> + /* Support ptrauth only if the system supports these capabilities. */
> + if (!has_vhe() || !system_supports_address_auth() ||
> + !system_supports_generic_auth())
> + return -EINVAL;

Nit: Funny indentation. Please align with the "if (". It's also
preferable to keep the two system_supports_xxx_auth() aligned or on the
same line, since they go together. This might be clearer split up:

if (!has_vhe())
return -EINVAL;

if (!system_supports_address_auth() ||
!system_supports_generic_auth())
return -EINVAL;

> + /*

I'd say "for now" here, since we might relax this rule later on.

> + * Make sure that both address/generic pointer authentication
> + * features are requested by the userspace together.
> + */
> + if (!test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, vcpu->arch.features) ||
> + !test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, vcpu->arch.features))
> + return -EINVAL;
> +
> + vcpu->arch.flags |= KVM_ARM64_GUEST_HAS_PTRAUTH;
> + return 0;
> +}
> +
> /**
> * kvm_reset_vcpu - sets core registers and sys_regs to reset value
> * @vcpu: The VCPU pointer
> @@ -261,6 +279,12 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
> kvm_vcpu_reset_sve(vcpu);
> }
>
> + if (test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, vcpu->arch.features) ||
> + test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, vcpu->arch.features)) {

Nit: funny indentation.

> + if (kvm_vcpu_enable_ptrauth(vcpu))
> + goto out;
> + }
> +

[...]

With those fixed,

Reviewed-by: Dave Martin <Dave.Martin@arm.com>

Cheers
---Dave
\
 
 \ /
  Last update: 2019-04-16 18:31    [W:0.224 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site