lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 2/3] Input: add a driver for GPIO controllable vibrators
Date
On Freitag, 12. April 2019 19:43:52 CEST Stephen Boyd wrote:
> Quoting Luca Weiss (2019-04-12 08:06:24)
>
> > diff --git a/drivers/input/misc/gpio-vibra.c
> > b/drivers/input/misc/gpio-vibra.c new file mode 100644
> > index 000000000000..3fd2dfd4f670
> > --- /dev/null
> > +++ b/drivers/input/misc/gpio-vibra.c
> > @@ -0,0 +1,209 @@
> > +
> > +static int gpio_vibrator_probe(struct platform_device *pdev)
> > +{
>
> [...]
>
> > + vibrator->input->id.bustype = BUS_HOST;
> > + vibrator->input->close = gpio_vibrator_close;
> > +
> > + input_set_drvdata(vibrator->input, vibrator);
> > + input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
> > +
> > + err = input_ff_create_memless(vibrator->input, NULL,
> > + gpio_vibrator_play_effect);
> > + if (err) {
> > + dev_err(&pdev->dev, "Couldn't create FF dev: %d", err);
> > + return err;
> > + }
> > +
> > + err = input_register_device(vibrator->input);
> > + if (err) {
> > + dev_err(&pdev->dev, "Couldn't register input dev: %d",
> > err);
> All the printks in this file need a newline.
Fixed.
> > + return err;
> > + }
> > +
> > + platform_set_drvdata(pdev, vibrator);
> > +
> > + return 0;
> > +}
> > +
> > +
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id gpio_vibra_dt_match_table[] = {
> > + { .compatible = "gpio-vibrator" },
> > + {},
>
> Nitpick: Drop the comma on the sentinel so nothing can go after it
> without causing a compilation error.
Changed as well.
> > +};
> > +MODULE_DEVICE_TABLE(of, gpio_vibra_dt_match_table);
> > +#endif
> > +

Thanks for the review! Will send a v4 shortly.
Luca


\
 
 \ /
  Last update: 2019-04-16 18:03    [W:0.071 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site