lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] PCI: al: Add Amazon Annapurna Labs PCIe host controller driver
From
Date
On Tue, 2019-04-09 at 08:57 +1000, Benjamin Herrenschmidt wrote:
> On Thu, 2019-03-28 at 13:57 +0200, Jonathan Chocron wrote:
> > Add support for Amazon's Annapurna Labs PCIe driver. The HW
> > controller
> > is based on DesignWare's IP.
> >
> > The HW doesn't support accessing the Root Port's config space via
> > ECAM,
> > so we obtain its base address via an AMZN0001 device.
> >
> > Furthermore, the DesignWare PCIe controller doesn't filter out
> > config
> > transactions sent to devices 1 and up on its bus, so they are
> > filtered
> > by the driver.
> >
> > All subordinate buses do support ECAM access.
> >
> > Implementing specific PCI config access functions involves:
> > - Adding an init function to obtain the Root Port's base address
> > from
> > an AMZN0001 device.
> > - Adding a new entry in the MCFG quirk array
> >
> > Co-developed-by: Vladimir Aerov <vaerov@amazon.com>
> > Signed-off-by: Jonathan Chocron <jonnyc@amazon.com>
> > Signed-off-by: Vladimir Aerov <vaerov@amazon.com>
> > Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
>
> Late to the party, sorry :-) That kernel.crashing.org email is on its
> last legs...
>
> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Lorenzo, is there anything else you need from Jonny before this can be
applied?

Thanks.

[unhandled content-type:application/x-pkcs7-signature]
\
 
 \ /
  Last update: 2019-04-16 15:15    [W:0.125 / U:15.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site