lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/2] Add support for the Purism Librem5 devkit
Hi Agnus,

On 19-04-15 16:53, Angus Ainslie (Purism) wrote:
> The Librem5 devkit is based on the imx8mq from NXP. This is a default
> devicetree to boot the board to a command prompt.

You should also provide a patch which adds the devicetree to the yaml
file, see: Documentation/devicetree/bindings/arm/fsl.yaml.

Thanks,
Marco

>
> Changes since v3:
>
> Freshly sorted and pressed nodes.
> Change the backlight to an interpolated scale.
> Dropped i2c2.
> Dropped devkit version number to match debian MR.
>
> Changes since v2:
>
> Fixed incorrect phy-supply for the fsl-fec.
> Dropped unused regulator property.
> Fixup Makefile for linux-next.
>
> Changes since v1:
>
> Dropped config file.
> Updated the board compatible label.
> Changed node names to follow naming conventions.
> Added a more complete regulator hierachy.
> Removed unused nodes.
> Removed unknown devices.
> Fixed comment style.
> Dropped undocumented properties.
>
> Angus Ainslie (Purism) (2):
> arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
> dt-bindings: Add an entry for Purism SPC
>
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx8mq-librem5-devkit.dts | 822 ++++++++++++++++++
> 3 files changed, 824 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
>
> --
> 2.17.1
>
>
>

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2019-04-16 09:59    [W:0.131 / U:1.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site