lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 2/5] mmc: mtk-sd: don't hard-code interrupt trigger type
When using devicetree for configuration, interrupt trigger type
should be described in the dts file, not hard-coded in the C code.

The mtk-sd silicon in the mt7621 soc uses an active-high interrupt
and so cannot be used with the current code.

So remove the trigger and leave it to be set from devicetree.

Signed-off-by: NeilBrown <neil@brown.name>
---
drivers/mmc/host/mtk-sd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 4492a4465c0e..14e048239143 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -2243,7 +2243,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
msdc_init_hw(host);

ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT, pdev->name, host);
+ 0, pdev->name, host);
if (ret)
goto release;


\
 
 \ /
  Last update: 2019-04-16 06:48    [W:0.090 / U:2.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site