lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 3/3] hwmon (occ): Add more details to Kconfig help text
On Tue, Apr 16, 2019 at 03:43:50PM +0000, Eddie James wrote:
> From: Eddie James <eajames@us.ibm.com>
>
> The help text needs to spell out how the driver runs on a BMC, as it
> previously seemed to indicate it ran on a POWER processor.
>
> Signed-off-by: Eddie James <eajames@us.ibm.com>

Applied.

Thanks,
Guenter

> ---
> drivers/hwmon/occ/Kconfig | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig
> index 2a3869f..1658634 100644
> --- a/drivers/hwmon/occ/Kconfig
> +++ b/drivers/hwmon/occ/Kconfig
> @@ -9,8 +9,10 @@ config SENSORS_OCC_P8_I2C
> select SENSORS_OCC
> help
> This option enables support for monitoring sensors provided by the
> - On-Chip Controller (OCC) on a POWER8 processor. Communications with
> - the OCC are established through I2C bus.
> + On-Chip Controller (OCC) on a POWER8 processor. However, this driver
> + can only run on a baseboard management controller (BMC) connected to
> + the P8, not the POWER processor itself. Communications with the OCC are
> + established through I2C bus.
>
> This driver can also be built as a module. If so, the module will be
> called occ-p8-hwmon.
> @@ -22,8 +24,10 @@ config SENSORS_OCC_P9_SBE
> select SENSORS_OCC
> help
> This option enables support for monitoring sensors provided by the
> - On-Chip Controller (OCC) on a POWER9 processor. Communications with
> - the OCC are established through SBE fifo on an FSI bus.
> + On-Chip Controller (OCC) on a POWER9 processor. However, this driver
> + can only run on a baseboard management controller (BMC) connected to
> + the P9, not the POWER processor itself. Communications with the OCC are
> + established through SBE fifo on an FSI bus.
>
> This driver can also be built as a module. If so, the module will be
> called occ-p9-hwmon.

\
 
 \ /
  Last update: 2019-04-17 00:15    [W:0.060 / U:14.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site